Software News

Dec 15, 2022

Discontinuation of PASupdate

Software PASupdate will be discontinued at the end of 2022. You will therefore receive no more software news on this tool.

Jul 8, 2021

PNOZmulti Configurator Software-Version 10.14 – one tool for all tasks

Use the software tool PNOZmulti Configurator to create safety-related user programs / safety programs. In conjunction with the hardware of the safe small controllers PNOZmulti it is possible to monitor safety functions in the field of machine protection.

Dec 10, 2020

PNOZmulti Configurator Software-Version 10.13.0 – new functions

From Software Version 10.13.0, the software tool PNOZmulti Configurator offers some new elements to enable simple configuration of safe user programs, which are run by the configurable small controller PNOZmulti 2. As a result you can implement wide-ranging requirements efficiently when monitoring safety functions such as L-muting in light curtain applications or configuration of the signal sequence of the safety gate system PSENmlock for example

Nov 11, 2020

PAS4000 Release 1.21.2

An overview of the most important new functions: CodeMeter Runtime updated and service pack now available in eight languages

Sep 23, 2020

Configurate automation projects even faster with PASvisu 1.9

Optimisation of performance of the configuration tool PASvisu builder. Additionally the new Undo-/ Redo-Function allows to easily undo small mistakes respectively the recovery of already created information. And the functionally safe operating mode selection of a machine via the HMI-function can now be controlled via touch over the matching visualization panels PMIvisu v8.

Jun 16, 2020

PNOZmulti Configurator Software version 10.12 – access permissions and operating mode selection made easy!

For the configurable, safe small controllers PNOZmulti 2 two new function blocks “MSO flex” and “MSO flex visu” are available for the configuration of access permissions and the functionally safe operating mode selection with PITreader.

Sep 18, 2019

PNOZmulti Configurator software version 10.11

For the PNOZmulti 2 small controllers, configure a safe network via real-time Ethernet SafetyNET p RTFL between PNOZmulti 2 base units and the PMCprotego DS safe motion solution.

Aug 21, 2019

PASvisu now with visualisation from several data sources

From Version 1.8. of PASvisu, data from several sources can be visualised in a PASvisu project. You can display data from different controllers or automation systems, such as PNOZmulti 2 and PSS 4000 projects, together in one visualisation project. Including diagnostic option.

Jun 6, 2019

PNOZmulti Configurator Version 10.10

Software PNOZmulti Configurator Version 10.10 with new function element for simple configuration of access permissions on plant and machinery and creation of macros for the base unit PNOZ m B1

May 15, 2019

PNOZsigma Configurator V 1.3.0 - New Version

Configurator for the safe speed monitor PNOZ s30

Jan 29, 2019

PASconfig for the remote I/O system PSSuniversal 2 now also with support for IO-Link-Master

From version 3.0, PASconfig now also supports the new IO-Link module PSS u2 ES 4IOL. This means that the remote I/O system PSSuniversal 2 can now also communicate with sensors and actuators via the globally standardised IO interface (IEC 61131-9).

Dec 14, 2018

PNOZsigma Configurator - Updated Version V 1.2.0

Nov 23, 2018

PASvisu 1.7 now with integral recipe management

With the user-friendly recipe management of the web-based visualisation software PASvisu (Version 1.7), you can now create your own recipes. Add the relevant values to variables and associate them to data sets. In this way, you can quickly and simply define data sets for your recipes an upload them within the runtime into the control system. Modifications such as cloning, editing and deleting can be performed here at any time.

Nov 22, 2018

PNOZmulti Configurator Version 10.9 – now also for offline simulation

You can simulate a PNOZmulti project from Version 10.9 offline completely without hardware. Simple logic elements, counters and operating modes are calculated automatically in the first step.

Nov 7, 2018

Safety Calculator PAScal – Version 1.9.1

Calculation tool to verify functional safety

Aug 29, 2018

PASmotion V1.3.0

Maintenance release and many improvements

Aug 20, 2018

Software PNOZmulti Configurator Version 10.8

Supports the safe analogue input module PNOZ m EF 4AI

Aug 15, 2018

PSENscan Configurator

PSENscan Configurator enables a rapid and simple configuration of the safety laser scanner PSENscan.

Jun 21, 2018

Software PNOZmulti Configurator Version 10.7

dual-pole semiconductor output module fort he safe monitoring of presses

May 23, 2018

PASvisu 1.6 - New software version is perfectly matched to the new PMI v7e visualization panels

Nov 30, 2017

Logging of variables with version 1.5 of the web-based visualisation software PASvisu

Version 1.5 of the web-based visualisation software PASvisu enables the logging of variables.

Nov 23, 2017

Software PNOZmulti Configurator Version 10.6

new functions

Nov 20, 2017

Safety Calculator PAScal – Version 1.9.0

Calculation tool to verify functional safety

Nov 15, 2017

Software PNOZmulti Configurator Version 10.5 – now with connection to the visualisation software PASvisu

Version 10.5 of PNOZmulti Configurator can be used to connect the software of PNOZmulti Configurator directly to the web-based visualisation software PASvisu . All you need is PASvisu from Version 1.4.

Sep 7, 2017

PASconfig version 2.0.0

Support for EtherNet/IP

Sep 6, 2017

PAS4000 Release 1.17

the most important changes at a glance

Jun 21, 2017

SafetyEYE Tools

SafetyEYE Configurator – Set up detection zones on your PC

Jun 21, 2017

PASloto version 1.1

PASloto Lock Out Tag Out now supports French

Jun 14, 2017

PASvisu version 1.4

Connect control systems PNOZmulti

May 24, 2017

PAS4000 Release 1.16.2

Simplified approval of your project thanks to application parameters

Apr 18, 2017

PASvisu version 1.3.1

With version 1.3.1 PASvisu is open for all control systems

Jan 25, 2017

PNOZmulti Configurator

The software tool for simple configuration of the small controllers PNOZmulti

Jan 11, 2017

Possible to connect to OPC Server in the automation system PSS 4000

New functions are available for the automation system PSS 4000 with system release 1.15.0

Sep 12, 2016

PMIvisu - The appropriate visualisation panel for PASvisu software

PMIvisu - The appropriate visualisation panel for PASvisu software

Sep 2, 2016

PNOZmulti Configurator 10.2.0 - Migration assistant on PNOZmulti 2 projects

If you convert your hardware from PNOZmulti or PNOZmulti Mini to PNOZmulti 2, a user-friendly migration tool is now available.

Jun 21, 2016

Safe, cross-project communication

For added convenience, Firmware Release 14 is now available to download for the automation system PSS 4000.

May 19, 2016

PASvisu Version 1.1.0 Release with project language management

Your automation projects can be managed using the web-based visualisation software PASvisu. Now with extensive multilingualism.

May 2, 2016

PNOZmulti Configurator 10.1.0

In Release 10.1.0 PNOZmulti configurator offers a new comment function and an enlarged workspace.

Feb 9, 2016

Reduce commissioning time and increase productivity

Firmware release 13 is available now to download for the PSS 4000, containing numerous new functions.

Feb 1, 2016

New PVIS system release supports OPC UA

PVIS is the established concept in circulation for extended Pilz diagnostics for PNOZmulti, PSS 3000 and PMC projects.

Dec 19, 2015

New webbased Pilz visualisation tool PASvisu 1.0.0 released!

Your automation projects can be managed using the web-based visualisation software PASvisu for simple configuration and optimum visualisation.

Dec 10, 2015

Software platform PAS4000 now with API interface

This genuinely makes life easier for users who configure control projects based on automated processes outside of PAS4000.

Nov 19, 2015

PNOZmulti Configurator version 10 now available

Version 10.0.0 of the PNOZmulti Configurator is now available. Discover the highlights of the latest version.