Poistuva tuote
Sulje
Olet Pilz internationalin verkkosivuilla
Valitse kieli tai vaihda maasivustoon.
Valitse maasi saadaksesi kansallista sisältöä
PMCprotego D.24/000/0/P/2/110-230VAC
Technical Details
at 3 x 230 V AC supply voltage:
Permanent output current: 24,0 A;
Imax (2 sec.) = 72,0 A; Imax (5 sec.) = 48,0 A;
Power consumption in S1 operation: 9,0 kVA
Internal brake resistor and mains filter
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€4,526.75
PMCprotego D.12/000/0/P/2/110-230VAC
Poistuva tuote
Technical Details
at 3 x 230 V AC supply voltage:
Permanent output current: 12,0 A;
Imax (2 sec.) = 30,0 A; Imax (5 sec.) = 24,0 A;
Power consumption in S1 operation: 4,5 kVA
Internal brake resistor and mains filter
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€3,481.67
PMCtendo SZ.51/1/2/2/7/K/H/30/00
Poistuva tuote
Mo = 4,7 Nm Io = 4,00A UN = 400V nN = 3000min-1 Jmot = 3,47 kgcm2Encoder
EQN 1135 EnDat2.2 multi-turn; with brake.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€2,600.38
PMCtendo DD5.03/A00/0/0/0/110-230VAC
Poistuva tuote
Servo amplifiers
Technical Details
at 3 x 230 V AC supply voltage:
Permanent output current: 3 A;
Imax (5 sec.) = 9 A;
Power consumption in S1 operation: 1,1 kVA
Internal brake resistor and mains filter
additional hardware option: Expansion Card Profinet
€4,862.29
PMCtendo SZ.75/0/1/2/7/K/H/45/00
Poistuva tuote
Mo = 30,0Nm Io = 25,2A
UN = 400 V nN = 4500 min-1
Jmot = 34.0 kgcm2
Encoder ECI 1118 EnDat2.2 single-turn;
without brake.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€2,989.79
PMCtendo SZ.73/1/1/2/7/K/H/30/00
Poistuva tuote
Mo = 20,8Nm Io = 14,0A
UN = 400V nN = 3000min-1
Jmot = 27,28 kgcm2
Encoder ECI 1118 EnDat2.2 multiturn;
with brake;
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€3,304.47
PMCtendo SZ.33/1/2/2/7/K/H/60/00
Poistuva tuote
Mo = 2,25Nm Io = 3,55A
UN = 400V nN = 6000min-1
Jmot = 0,586 kgcm2
Encoder EQN 1135 EnDat2.2 multiturn;
with brake;
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€2,198.24
PMCprotego D.06/A00/0/0/2/208-480VAC
Poistuva tuote
Technical data at 3 x 400 V AC: Continuous output current: 6 A; Imax
(2 s) = 18 A; Imax (5 s) = 12 A; Power consumption in S1 mode: 4.5 kVA
Integral brake resistor Further hardware options: Expansion card
PROFINET.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€3,520.33
PMCtendo SZ.85/1/2/2/7/F/H/20/00
Poistuva tuote
Mo = 94,0Nm Io = 53,9A
UN = 400V nN = 2000min-1
Jmot = 188,46 kgcm2
Encoder EQN 1135 EnDat2.2 multiturn;
with brake;
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€9,029.20
PMCtendo SZ.31/1/5/2/7/K/H/30/00
Poistuva tuote
Mo = 0,95Nm Io = 2,02A
UN = 400V nN = 3000min-1
Jmot = 0,376 kgcm2
resolver
with brake;
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€1,670.62
PMCtendo SZ.32/1/1/2/7/K/H/30/00
Poistuva tuote
Mo = 1,68Nm Io = 1,67A
UN = 400V nN = 3000min-1
Jmot = 0,476 kgcm2
Encoder ECI 1118 EnDat2.2 singleturn;
with brake;
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€1,724.34
PMCtendo SZ.75/0/2/2/7/K/H/30/00
Poistuva tuote
Mo = 30,2Nm Io = 19,5A
UN = 400V nN = 3000min-1
Jmot = 34,0 kgcm2
Encoder EQN 1135 EnDat2.2 multiturn;
without brake;
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€3,400.89
PMC SI6A062 terminal set (Z/U/Y/X)
Poistuva tuote
Terminal set for drive controllers SI6A062Z, SI6A062U, SI6A062Y,
SI6A062X
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€74.09
PMC SI6A262R/EC 2x 25A
Poistuva tuote
Multi-axis PMC SI6 drive controller
Technical data at 3 x 400 V AC:
Nominal output current: 2x 25 A @ 4kHz / 2x 20 A @ 8kHz.
Imax: 210% for 2s / 250% for 2s.
Apparent power: 2x 17.3 KVA.
Without brake resistor.
Option:
Safety module SR6 (STO using terminals) and EtherCat.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€3,447.28
PMC SI6A262Z/EC 2x 25A
Poistuva tuote
Multi-axis PMC SI6 drive controller
Technical data at 3 x 400 V AC:
Nominal output current: 2x 25 A @ 4kHz / 2x 20 A @ 8kHz.
Imax: 210% for 2s / 250% for 2s.
Apparent power: 2x 17.3 KVA.
Without brake resistor.
Option:
Without Safety module technology, with EtherCat.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€3,308.36
PMC SI6A062R/EC 2x 5A
Poistuva tuote
Multi-axis PMC SI6 drive controller
Technical data at 3 x 400 V AC:
Nominal output current: 2x 5 A @ 4kHz / 2x 4.5 A @ 8kHz.
Imax: 210% for 2s / 250% for 2s.
Apparent power: 2x 3.5 KVA.
Without brake resistor.
Option:
Safety module SR6 (STO using terminals) and EtherCat.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€2,189.52
PMC SI6A062 terminal set (R)
Poistuva tuote
Terminal set for drive controllers SI6A062R with STO using terminals
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€87.45
PMC SI6A262 terminal set (Z/U/Y/X)
Poistuva tuote
Terminal set for drive controllers SI6A262Z, SI6A262U, SI6A262Y,
SI6A262X
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€124.11
PMC SI6A261Z/EC 1x 22A
Poistuva tuote
Multi-axis PMC SI6 drive controller
Technical data at 3 x 400 V AC:
Nominal output current: 1x 22 A @ 4kHz / 1x 20 A @ 8kHz.
Imax: 210% for 2s / 250% for 2s.
Apparent power: 16.6 KVA.
Without brake resistor.
Option:
Without Safety module technology, with EtherCat.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€2,098.75
PMC SI6A161 terminal set (R)
Poistuva tuote
Terminal set for drive controllers SI6A161R with STO using terminals
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
€83.74
Lisätty ostoskoriin
Tallenna ostoskori
Lisää uusi tilaus tai pyydä yksilöllinen tarjous