CE marking

May instructions for use contain references to other instructions?

If a plant consisting of several partial machines is being assembled, the instructions for use may also need to be revised. If it's simply a matter of adding an automatic infeed/outfeed (e.g. robot/handling), it may be enough to attach the instructions from the original instructions for use. This also depends on the complexity of the eventual plant when it is complete.

When several individual machines are combined to form an assembly of machines, DIN report 146 can be used as a guide when producing instructions for use.

 

Headoffice

Pilz GmbH & Co. KG
Felix-Wankel-Straße 2
73760 Ostfildern
Germany

Telephone: +49 711 3409-0
E-Mail: pilz.gmbh@pilz.de

Technical Support

Telephone: +49 711 3409 444
E-Mail: support@pilz.com

Americas

  • Canada: +1 888-315-PILZ (315-7459)
  • United States (toll-free): +1 877-PILZUSA (745-9872)
  • Mexico: +52 55 5572 1300
  • Brazil: + 55 11 99562-8882

Europe

  • Netherlands: +31 347 320477
  • Turkey: +90 216 5775552
  • Sweden: +46 300 13990 / +45 74436332
  • Spain: +34 938497433
  • Austria: +43 1 7986263-444
  • Switzerland: +41 62 889 79 32
  • Belgium: +32 9 321 75 70
  • Ireland: +353 21 4804983
  • United Kingdom: +44 1536 462203
  • Portugal: +351 229 407 594
  • Russia: +7 495 6654993
  • Germany: +49 711 3409 444
  • Denmark: +45 74436332
  • France (toll-free): +33 3 88104000
  • Finland: +358 10 3224030 / +45 74436332
  • Italy: +39 0362 1826711

Asia Pacific

  • South Korea: +82 31 778 3390
  • Singapore: +65 6829 2920
  • Australia (toll-free): +61 3 9560 0621 / 1300 723 334
  • Japan: +81 45 471 2281
  • China: +86 400-088-3566
  • Thailand: +66 210 54613
  • New Zealand: +64 9 6345350
  • Taiwan: +886 2 25700068
Was this article helpful?