Global Site | english

Operational safety

Are there standard inspection periods for machinery?

Legislation does not stipulate any universally valid specifications for the inspection frequency of machinery. Indeed this would not make sense, given the diversity of machinery and the associated requirements.

The inspection frequency should be defined individually by the operator, in keeping with the following specifications: a written hazard assessment must be produced, which defines the type, scope and time intervals (in accordance with §3 BetrSichV). The potential need for shorter inspection periods, due to specific operational conditions for example, must also be examined within the scope of the hazard assessment. A longer inspection period is also conceivable – but only after the hazard assessment has shown that this is appropriate.

Essentially, inspections periods for plant and machinery should be measured so that any defects that are likely to occur can be detected in good time (§5 BGV A3).

 

Headoffice

Pilz GmbH & Co. KG
Felix-Wankel-Straße 2
73760 Ostfildern
Germany

Telephone: +49 711 3409-0
E-Mail: pilz.gmbh@pilz.de

Technical Support

Telephone: +49 711 3409 444
E-Mail: support@pilz.com

Americas

  • United States (toll-free): +1 877-PILZUSA (745-9872)
  • Brazil: + 55 11 4942-7028
  • Canada: +1 888-315-PILZ (315-7459)
  • Mexico: +52 55 5572 1300

Europe

  • Austria: +43 1 7986263-444
  • France (toll-free): +33 3 88104000
  • Finland: +358 10 3224030 / +45 74436332
  • Denmark: +45 74436332
  • Russia: +7 495 6654993
  • Germany: +49 711 3409 444
  • Sweden: +46 300 13990 / +45 74436332
  • Turkey: +90 216 5775552
  • Switzerland: +41 62 88979 30
  • Ireland: +353 21 4804983
  • Netherlands: +31 347 320477
  • Spain: +34 938497433
  • Italy: +39 0362 1826711
  • United Kingdom: +44 1536 462203
  • Belgium: +32 9 321 75 75

Asia Pacific

  • Australia: +61 3 9560 0621
  • China: +86 21 60880878-216
  • Taiwan: +886 2 25700068
  • Japan: +81 45 471 2281
  • South Korea: +82 31 778 3390
  • New Zealand: +64 9 6345350