Global Site | english

Operational safety

Do PNOZ units for 230V operating voltage meet the conditions for PELV for the start and input circuits in accordance with EN 50178? Where is that documented?

Information regarding operating voltage is documented in the relevant instructions for use.

For example, the operating instructions for PNOZ X3 contain the following note:


Note regarding overvoltage category III:
If voltages higher than low voltage (>50 VAC or >120 VDC) are present on the unit, connected operator elements and sensors must have a rated insulation voltage of at least 250 V.

Units for which this note appears in the operating instructions meet PELV requirements in accordance with EN 50178.

Units for which this note does not appear in the operating instructions do not meet PELV requirements in accordance with EN 50178.

 

Headoffice

Pilz GmbH & Co. KG
Felix-Wankel-Straße 2
73760 Ostfildern
Germany

Telephone: +49 711 3409-0
E-Mail: pilz.gmbh@pilz.de

Technical Support

Telephone: +49 711 3409 444
E-Mail: support@pilz.com

Americas

  • United States (toll-free): +1 877-PILZUSA (745-9872)
  • Canada: +1 888-315-PILZ (315-7459)
  • Brazil: + 55 11 4942-7028
  • Mexico: +52 55 5572 1300

Europe

  • Finland: +358 10 3224030 / +45 74436332
  • Ireland: +353 21 4804983
  • Italy: +39 0362 1826711
  • Netherlands: +31 347 320477
  • Turkey: +90 216 5775552
  • France (toll-free): +33 3 88104000
  • United Kingdom: +44 1536 462203
  • Russia: +74956654993
  • Denmark: +45 74436332
  • Austria: +43 1 7986263-444
  • Germany: +49 711 3409 444
  • Belgium: +32 9 321 75 75
  • Spain: +34 938497433
  • Sweden: +46 300 13990 / +45 74436332
  • Switzerland: +41 62 88979 30

Asia Pacific

  • Taiwan: +886 2 25681600
  • China: +86 21 60880878-216
  • Japan: +81 45 471 2281
  • Australia: +61 3 9560 0621
  • New Zealand: +64 9 6345350
  • South Korea: +82 31 778 3390