Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
{"id":"584300","name":"PSENvip IPM","price":"0.00","currency":"EUR","category":["A0100","A0100B0140","00106002207043","0010600220704380HZ"]}
Actual product may vary
PSENvip IPM
Product ID: 584300
Module for bending angle measurement for PSENvip E, PSENvip R andPSENvip R LR
consisting of transmitter, receiver and special module PSSu K FAU P
Item
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer
Select intended use
General data
| Approval |
CE
UKCA cULus Listed |
| Application range | Standard |
Technical data
Electrical data
| Purpose of U1 | Module supply |
| Supply voltage (V) | 24 V |
| Type of supply voltage U1 | DC |
| Power consumption DC | 5.5 W |
| Purpose of U2 | Periphery supply |
| Supply voltage 2 (V) |
24
24 |
| Type of supply voltage U2 | DC |
| Tolerance of U2 | -30 %/+25 % |
Inputs
| Number of digital inputs |
1
1 |
| DC voltage at input | 24 V DC |
| Input type to EN 61131-2 | 3 |
Semiconductor outputs
| Number of semicond. outputs | 1 |
| Tolerance ext. volt. DC S/C | |
| Utilisation cat. to EN 60947-1 | DC-12 |
USB interface
| Number of USB host interfaces | 1 |
Ethernet interface
| Ethernet IP addr. factory set | 192.168.0.13 |
| Connector type ETHERNET int. | RJ45 |
| Ethernet transmission rate |
10 MBit/s
100 MBit/s |
CANopen interface
| Number of Ethernet interfaces | 2 |
Environmental data
| Climatic suitability to ... |
EN 60068-2-30
EN 60068-2-2 EN 60068-2-1 EN 60068-2-78 EN 60068-2-14 |
| Ambient temperature standard | EN 60068-2-14 |
| Ambient temperature | 0 - 60 °C |
| Storage temperature standard | EN 60068-2-1/-2 |
| Climatic suitability standard |
EN 60068-2-30
EN 60068-2-78 |
| Humidity rating | 93 % r. h. at 40 °C |
| Condensation permitted? | Not permitted |
| Perm. operating height ASL | 2000 m |
| EMC to standard ... |
EN 61131-2
EN 61000-4-4 EN 61000-4-5 EN 61000-6-4 EN 61000-4-6 EN 61000-4-2 EN 61000-4-3 |
| Vibration to standard ... | EN 60068-2-6 |
| Acc. shock to standard1 | 15g |
| Clearance & creepage dist. to | EN 61131-2 |
| Overvoltage category | II |
| Pollution degree clear.&creep. | 2 |
| Protection type standard | EN 60529 |
| Protection type, mounting | |
| Protection type, housing | |
| Terminal protection type |
Potential separation
| Potential isolation 1 between | Periphery and module supply |
| Type of potential isolation 1 | Basic insulation |
Mechanical data
| Mounting position | vertical |
| DIN-rail dimensions | 35 x 7.5 EN 50022 |
| Housing material lower section | PC |
| Housing material front plate | PC |
| Connection terminal |
Screw terminal
Spring-loaded terminal |
| Terminal style | plug-in |
| Flex. cond. c/s AWG info | 24 - 12 AWG |
| Height dimension | 96 mm |
| Width dimension | 45 mm |
| Depth dimension | 111.5 mm |
| Net weight | 170 g |
| Gross weight | 180 g |
Environment
| WEEE classifikation (08/2018) | 5 devices (feed size < 50cm) |
Commercial data
| Harmonized System Code | 85176200 |
| EAN-Code | 4046548089844 |
| Volume | 0.617 |
Obligatory accessories
Set4 Screw Terminals
750016
Set of plug-in screw terminals for PNOZ m B1, base unit, smallcontrollers PNOZmulti
2.
Set4 Spring Terminals
751016
Set of spring-loaded terminals for PNOZ m B1, base unit, smallcontrollers
PNOZmulti 2.