Router

On Ethernet, a Router connects two different Ethernet networks. As an Ethernet network is identified by the Net-ID (= part of the IP address), the Net-ID can be used to decide whether the network subscriber is in the same network or whether data packets must be transferred to a Router to pass on.
If necessary, a Router can convert the physical type of the network (e.g. convert from Ethernet to ISDN) but it cannot convert the protocol.

 

Head office

Pilz Australia Safe Automation
Unit 1, 12-14 Miles Street
Mulgrave, Melbourne, Victoria 3170
Australia

Telephone: +61 3 9560 0621 / 1300 723 334
E-Mail: safety@pilz.com.au

Inside Sales



Telephone: +61 3 9560 0621
E-Mail: sales@pilz.com.au

Technical Support

Telephone: +61 3 9560 0621
E-Mail: techsupport@pilz.com.au

Was this article helpful?