25 Jan 2023

Safe monitoring of the cardboard feed on packaging machines

With the modular safety relay myPNOZ

Packaging solutions must often accomplish one task above all: to safely protect operators. The same applies to monitoring the cardboard feed. In this case it is essential to avoid a scenario in which an operator can reach into the machine and get injured because the opening for the material feed is empty.

For this case Pilz offers a TÜV-certified solution up to PL d/Cat. 3 of EN ISO 13849- 1 or SIL CL 2 of EN IEC 62061, which can be assembled and adapted flexibly to safely monitor the feed of packaging material. Users can be confident that all the necessary safety precautions are met. Two optical sensors monitor the opening on the cardboard magazine. If there is insufficient cardboard in the magazine, the sensors will report this state to the modular safety relay myPNOZ. The machine is stopped until the cardboard is replenished and production can restart.

More about myPNOZ

Benefits of the solution with the modular safety relay myPNOZ and two optical sensors:

  • Can be called up pre-configured using the myPNOZ Creator type code: myPNOZ.91.CKA360AB000XB700 with semiconductor outputs or myPNOZ.03.CKA360AB000XD700 with relay outputs
  • Plug & play: wire up - ready to use immediately
  • Flexible: moderate adjustments can be made if additional safety functions are to be monitored
  • Easy: can be integrated into existing applications

Further information:

Safe monitoring of the cardboard feed on packaging machines
Head office

Pilz Australia Safe Automation
Unit 1, 12-14 Miles Street
Mulgrave, Melbourne, Victoria 3170
Australia

Telephone: +61 3 9560 0621 / 1300 723 334
E-Mail: safety@pilz.com.au

Was this article helpful?