Router

On Ethernet, a Router connects two different Ethernet networks. As an Ethernet network is identified by the Net-ID (= part of the IP address), the Net-ID can be used to decide whether the network subscriber is in the same network or whether data packets must be transferred to a Router to pass on.
If necessary, a Router can convert the physical type of the network (e.g. convert from Ethernet to ISDN) but it cannot convert the protocol.

 

Contact

Pilz Automation Safety L.P.
7150 Commerce Boulevard
Canton, MI 48187
USA

Telephone: +1 734 354-0272
E-Mail: info@pilzusa.com

Technical Support

Telephone: +1 877 745-9872
E-Mail: techsupport-us@pilz.com

Was this article helpful?