PNOZmulti Configurator software version 10.11

For the PNOZmulti 2 small controllers, configure a safe network via real-time Ethernet SafetyNET p RTFL between PNOZmulti 2 base units and the PMCprotego DS safe motion solution.

The PNOZmulti Configurator is a software tool used to configure the safe small controllers PNOZmulti. Software Version 10.11 enables you to use the real-time Ethernet SafetyNET p RTFL to configure a secure data exchange between PNOZmulti 2 base units (PNOZ m B0 or B1) and the safe motion solution PMCprotego DS.
PMCprotego DS is composed of the servo amplifier PMCprotego D and the safety card PMCprotego S3. 32-bit data is exchanged via RTFL, enabling short reaction times for your application. Previously you could connect up to 16 PNOZmulti 2 base units in a linear topology via the expansion module PNOZ m EF SafetyNET. Now it is also possible to incorporate the safe motion solution PMCprotego DS into the SafetyNET p network, creating a safe drive solution in conjunction with PNOZmulti 2. PNOZmulti 2 monitors the drive solution and ensures the movement is stopped in a controlled and therefore safe manner.

New version of the motion monitoring module PNOZmulti 2

A new version for the motion monitoring modules is supported for connection to the base unit PNOZmulti 2:

  • PNOZ m EF 1MM (V2.3)
  • PNOZ m EF 2MM (V2.3)

New function in Version 2.3: selectable tolerance times for track signals from the PNOZmulti 2 motion monitoring modules PNOZ m EF 1MM/2MM. A new encoder type for proximity switches with reduced diagnostics is also available, i.e. for use in wind turbines.

Contact

Pilz Ireland
Business and Technology Park, Model Farm Road
Cork
Ireland

Telephone: +353 21 4346535
E-Mail: sales@pilz.ie

Sales

Telephone: +353 21 4346535
E-Mail: sales@pilz.ie

Was this article helpful?