モーションコントロールシステムPMCprimo DrivePのアクセサリ - 技術データ

Cable assembled on both sides, Connector Sub-D9 male <> connector Sub-D9 female CAN network, length: 0.7 m.

Cable assembled on both sides, Connector Sub-D9 male <> connector Sub-D9 female CAN network, length: 0.25 m.

Connection cable between operator device VTx and PMCprimo system with Modbus interface (RS422). Length in accordance with customer specifications.

Cable for rotary encoder of type 5853 to PMCprimo Cable assembled on both sides. Connector Sub-D9 <> round connector 12-pin For all devices PMCprimo with SSI encoder connection via D-Sub connector Trailing capability. Length in accordance with customer specifications.

Fieldbus junction box for PMCprimo DriveP (size 1.5 A to 24 A) Interfaces: CANbus, RS 232 and PROFIBUS with termination switch and RJ45 cable to connect the fieldbus junction box to the PMCprimo C.

Fieldbus junction box for PMCprimo DriveP (size 1.5 A to 24 A) Interfaces: CAN1, RS232 and CAN2 with termination switch and RJ45 cable to connect the fieldbus junction box to the PMCprimo C.

Fieldbus junction box for PMCprimo DriveP (size 48 A and 72 A) Interfaces: CAN1, RS 232 and CAN2 with termination switch and RJ45 cable to connect the fieldbus junction box to the PMCprimo C.

Fieldbus junction box for PMCprimo DriveP (size 48 A and 72 A) Interfaces: CANbus, RS 232 and PROFIBUS with termination switch and RJ45 cable to connect the fieldbus junction box to the PMCprimo C.

Replacement connector for the controller card PMCprimo C at the interface X40.

suitable for the device series PMCprimo MC consisting of: X40a, X40b and X50a, X50b, X50c