text.skipToContent text.skipToNavigation
Close 

You are on the Pilz international website



Please select a language or switch to a country
Choose your country to get national content

PSEN cs6.1p 1switch

Product ID: 542150
RFiD safety switch, 2 safe SC outputs, 8-pin M8 male connector, IP67, 4 actuation directions, typ. operating distance (square) 11 mm,Sao = 8 mm, Sar = 20 mm, PU = 1 piece fully coded switch, with actu...  More

Item

Available soon

Save basket

Create a new order or get an individual offer

Select intended use

RFiD safety switch, 2 safe SC outputs, 8-pin M8 male connector, IP67, 4 actuation directions, typ. operating distance (square) 11 mm,Sao = 8 mm, Sar = 20 mm, PU = 1 piece fully coded switch, with actuator, max. 8 teach-in processes.

Approval CE  
UKCA  
cULus Listed  
FCC  
IC  
TÜV  
ECOLAB  
EAC (Eurasian)  
Sensor principle Transponder  
Coding level to ISO 14119 High  
Classification to EN 60947-5-3 PDDB  
Transponder coding fully coded  
Suitable for series connection yes  
unit type Sensor  
 
Supply voltage (V) 24  V
Type of supply voltage U1 DC  
Power consumption DC 1  W
Number of inputs 2  
DC voltage at input 24 V DC  
Number of OSSD outputs 2  
Number of sig. outputs 1  
Potential isolation S/C O No  
S/C output short circuit proof Yes  
Utilisation cat. to EN 60947-1 DC-12  
Ambient temperature standard EN 60068-2-14  
Ambient temperature -25 - 70  °C
Max. ambient temp. at Hmax +60 °C  
Max. ambient temp. at 2000 m +70 °C  
Storage temperature standard EN 60068-2-1/-2  
Climatic suitability standard EN 60068-2-30  
Humidity rating 93 % r. h. at 40 °C  
Perm. operating height ASL 4000 m  
EMC to standard ... EN 60947-5-3  
Vibration to standard ... EN 60947-5-2  
Acc. shock to standard1 30g  
Overvoltage category III  
Pollution degree clear.&creep. 3  
Protection type, housing  
 
Change op. distance temp.act.1 +-0.02mm/°C  
Change op. distance temp.act.2 +-0.02mm/°C  
Change op. distance temp.act.3 +-0.02mm/°C  
Sensor can be flush-mounted Yes, follow installation guide  
Connection type M8, 8-pin male  
Product material PBT  
PA+GF  
Polycarbonate  
Height dimension 26.4  mm
Width dimension 97.6  mm
Depth dimension 13  mm
Net weight 48  g
Gross weight 58  g
Operating frequency 122 kHz - 128 kHz  
 
RoHS directive 2011/65/EU  
2015/863/EU  
RoHS conformity yes  
RoHS exceptions yes  
RoHS except.s acc. to direct. 7C I  
REACh compliance contains min. 1 SVHC-substance  
REACh included substances Lead oxide  
%-part of the pollutant > 0,1%  
CAS No. 1317-36-8  
WEEE classifikation (08/2018) 5 devices (feed size < 50cm)  
 
Harmonized System Code 85365019  
EAN-Code 4046548077360  
ECLASS version ECLASS-13  
ECLASS Reference Feature 27274601  
ETIM Version ETIM-9.0  
ETIM Reference Group EG000026  
ETIM Reference Feature EC002592  
Volume 0  
 

Optional accessories

PSEN cable M8-8sf, 2m
PSEN cable M8-8sf, 2m 533150
Connection cable, PUR, yellow RAL1003, suitable for drag chains, 8-pin,socket straight M8, on open line end, A-coded, cable length: 2m
SDD ES PROFINET
SDD ES PROFINET 540138
SDD (Safety Device Diagnostics), fieldbus module, standard, Profinet , 2 RJ45 ports, 6 digital inputs/outputs, plug-in connection terminals (not supplied with the unit).
PSEN ix2 F4 code
PSEN ix2 F4 code 535111
PSEN, decentralised passive junction for series connection, connectionup to 4 safety sensors (series-connectable), max. 5 PSEN ix2 F4 code with max. 16 subscribers, forwarding of diagnostic information, 96 x 48 x 57 mm (H x W x D), connection type spring-loaded terminals, IP20.
PSEN Y junction M8-M12/M12 PIGTAIL
PSEN Y junction M8-M12/M12 PIGTAIL 540337
Cable Y-adapter with Y-plug-in connector, IP67, M12 male connector (X2, evaluation device), black, straight, 8-pin, A-coded on M12 female connector (X2, sensor/next plug-in connector), black, straight, 8-pin, A-coded and M8 female connector (X3, sensor), black, straight, 8-pin, A-coded, PUR, 0.25 m, 8× 0.14 mm², yellow, incorrect insertion ofthe connections electrically excluded by internal wiring, to connect PSENcode and PSENslock.
PSEN ix2 F8 code
PSEN ix2 F8 code 535112
PSEN, decentralised passive junction for series connection, connectionup to 8 safety sensors (series-connectable), max. 3 PSEN ix2 F8 code with max. 16 subscribers, forwarding of diagnostic information, 96 x 93 x 57 mm (H x W x D), connection type spring-loaded terminals, IP20.
PSEN screw M4x16 10pcs
PSEN screw M4x16 10pcs 540310
One-way screws, one-way slot, M4x16, material stainless steel, PU = 10 pieces, suitable for actuator: PSEN 1.1, PSEN 2.1, PSEN me1.x AS, PSENme4.
PSEN cable M8-8sf  M8-8sm, 2m
PSEN cable M8-8sf M8-8sm, 2m 533157
Connection cable, PUR, yellow RAL1003, suitable for drag chains, 8-pin,socket straight M8, on connector straight M8, A-coded, cable length: 2m
PSEN cable M8-8sf  M8-8sm, 1m
PSEN cable M8-8sf M8-8sm, 1m 533156
Connection cable, PUR, yellow RAL1003, suitable for drag chains, 8-pin,socket straight M8, on connector straight M8, A-coded, cable length: 1m
PSEN mag/cs bracket straight
PSEN mag/cs bracket straight 532111
Assembly aid, for PSENmag and PSENcode. Alignment guide. PU = 2 pieces.
PSEN Winkel / bracket
PSEN Winkel / bracket 532110
Mounting bracket PSENmag, PU = 1 piece.
PSEN cable M8-8sf  M8-sm, 0.5m
PSEN cable M8-8sf M8-sm, 0.5m 533155
Connection cable, PUR, yellow RAL1003, suitable for drag chains, 8-pin,socket straight M8, on connector straight M8, A-coded, cable length: 0.5m
PSEN cable M8-8sf, 30m
PSEN cable M8-8sf, 30m 533154
Connection cable, PUR, yellow RAL1003, suitable for drag chains, 8-pin,socket straight M8, on open line end, A-coded, cable length: 30m
PSEN Y junction M8 SENSOR
PSEN Y junction M8 SENSOR 540317
Plug-in connector, Y-adapter, IP67, M8 male connector (X1, evaluationdevice), 8-pin, A-coded on M8 female connector (X2, sensor/next plug-in connector), 8-pin, A-coded and M8 female connector (X3, sensor), 8-pin, A-coded, incorrect insertion of the connections electricallyexcluded by internal wiring, to connect PSENcode, to directly connect PSENslock on the sensor.
PSEN cable M8-8sf, 20m
PSEN cable M8-8sf, 20m 533153
Connection cable, PUR, yellow RAL1003, suitable for drag chains, 8-pin,socket straight M8, on open line end, A-coded, cable length: 20m
PSEN converter M8-8sf -- M12-8sm
PSEN converter M8-8sf -- M12-8sm 540329
Cable, adapter, IP67, M12 male connector, black, straight, 8-pin, A- coded on M8 female connector, black, straight, 8-pin, A-coded, PUR, 0.25 m, 8× 0.14 mm², yellow, internal wiring 1:1 for all 8 signals, converter to connect PSEN sensors.
PSEN Y junction M8 cable channel
PSEN Y junction M8 cable channel 540318
Plug-in connector, Y-adapter, IP67, M8 male connector (X1, evaluationdevice), 8-pin, A-coded on M8 female connector (X2, sensor), 8-pin, A-coded and M8 female connector (X3, sensor)/next plug-in connector), 8-pin, A- coded, incorrect insertion of the connections electrically excluded byinternal wiring, to connect PSENcode, to connect PSENslock on the cable outlet in the cable duct.
PSEN cable M8-8sf, 10m
PSEN cable M8-8sf, 10m 533152
Connection cable, PUR, yellow RAL1003, suitable for drag chains, 8-pin,socket straight M8, on open line end, A-coded, cable length: 10m
PSEN cable M8-8sf, 5m
PSEN cable M8-8sf, 5m 533151
Connection cable, PUR, yellow RAL1003, suitable for drag chains, 8-pin,socket straight M8, on open line end, A-coded, cable length: 5m
PSEN screw M4x12 10pcs
PSEN screw M4x12 10pcs 540309
One-way screws, one-way slot, M4x12, material stainless steel, PU = 10 pieces, suitable for actuator: PSEN cs1.1, PSEN cs2.1, PSEN cs2.2.
PSEN cs bracket stop sliding door
PSEN cs bracket stop sliding door 532109
Assembly aid, for PSENcode, can be used as a mechanical stop for sliding gates, PU = 2 pieces, 1 part for switch plus 1 part for actuator.
PSEN cs bracket stop swinging door
PSEN cs bracket stop swinging door 532108
Assembly aid, for PSENcode, can be used as a mechanical stop for swing gates, PU = 2 pieces, 1 part for switch plus 1 part for actuator.
SDD ES ETH
SDD ES ETH 540130
SDD (Safety Device Diagnostics), fieldbus module, standard, Modbus/TCP,2 RJ45 ports, 6 digital inputs/outputs, plug-in connection terminals (not supplied with the unit).
SDD ES PROFIBUS
SDD ES PROFIBUS 540132
SDD (Safety Device Diagnostics), fieldbus module, standard, Profibus DP,9 DP-V0, 9-pin D-Sub connector, 6 digital inputs/outputs, plug-in connection terminals (not supplied with the unit).

Installation accessories

PSEN cs6.1 1actuator
PSEN cs6.1 1actuator 542180
RFiD actuator for safety switch PSEN cs6.x, IP67, PU = 1 piece.
PSEN cs6.1 low profile glue 1 actuator
PSEN cs6.1 low profile glue 1 actuator 542187
RFiD actuator for safety switch PSEN cs6.x, IP67, adhesive, without screw-on option, PU = 1 piece.
PSEN cs6.1 low profile screw 1 actuator
PSEN cs6.1 low profile screw 1 actuator 542188
RFiD actuator for safety switch PSEN cs6.x, IP67, adhesive, with screw-on option, PU = 1 piece.

Obligatory accessories

PSEN cs6.1 1actuator
PSEN cs6.1 1actuator 542180
RFiD actuator for safety switch PSEN cs6.x, IP67, PU = 1 piece.
PSEN cs6.1 low profile glue 1 actuator
PSEN cs6.1 low profile glue 1 actuator 542187
RFiD actuator for safety switch PSEN cs6.x, IP67, adhesive, without screw-on option, PU = 1 piece.
PSEN cs6.1 low profile screw 1 actuator
PSEN cs6.1 low profile screw 1 actuator 542188
RFiD actuator for safety switch PSEN cs6.x, IP67, adhesive, with screw-on option, PU = 1 piece.