The motor is allowed to travel a permitted distance following a start command. A safe stop function must be triggered once the limit value is reached. If the permitted distance is exceeded, this must be detected and the drive must be safely brought to a standstill. Encoder systems with relative measurement are sufficient for this safety function.
Safely Limited Increment (SLI)
Contact
Pilz New Zealand
4 Prescott Street, Penrose
Auckland 1061
New Zealand
Telephone: +64 9 6345350
E-Mail: office@pilz.co.nz
Technical Support
Telephone: +64 9 6345350
E-Mail: office@pilz.co.nz
Was this article helpful?