On network topologies constructed with coaxial cable (e.g. in accordance with 10Base2), the start and end of each segment must be terminated with a resistor. The value of the terminating resistor must correspond to the cable impedance. On 10Base2, this is 50 Ohms.
Pilz Czech s.r.o.
Jeremenkova 1160/90a
140 00 Praha 4
Czech Republic
Telephone: +420 222 135353
E-Mail: info@pilz.cz
Telephone: +420 222 135354
E-Mail: Support@pilz.cz