Uitloop artikel
Sluiten
U bevindt zich op de internationale Pilz-website
Kies een land
Selecteer uw land voor content voor uw land
PMCprotego D.06/000/0/0/2/208-480VAC
Servoversterker, continue uitgangsstroom bij 3 x 400 V AC: 6 A,
piekuitgangsstroom gedurende 2 s: 18 A, piekuitgangsstroom gedurende 5s:
12 A, opgenomen vermogen in het S1-bedrijf: 4,5 kVA,
geïntegreerderemweerstand.
Belangrijke opmerking: Dit artikel bevindt zich aan het einde van de productlevenscyclus en zal daarom binnen afzienbare tijd niet meer beschikbaar zijn. Neem conact op met uw contactpersoon bij Pilz voor eengeschikt alternatief of vervolgproduct.
Op aanvraag
PMCprotego D.01/000/0/0/2/208-480VAC
Uitloop artikel
Technical data at 3 x 400 V AC: Continuous output current: 1.5 A; Imax
(2 s) = 4.5 A; Imax (5 s) = 3.0 A; Power consumption in S1 mode: 1.1
kVA Integral brake resistor.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.12/000/0/0/2/208-480VAC
Uitloop artikel
Servoversterker, continue uitgangsstroom bij 3 x 400 V AC: 12 A,
piekuitgangsstroom gedurende 2 s: 24 A, piekuitgangsstroom gedurende 5s:
24 A, opgenomen vermogen in het S1-bedrijf: 9 kVA, geïntegreerde
remweerstand.
Belangrijke opmerking: Dit artikel bevindt zich aan het einde van de productlevenscyclus en zal daarom binnen afzienbare tijd niet meer beschikbaar zijn. Neem conact op met uw contactpersoon bij Pilz voor eengeschikt alternatief of vervolgproduct.
Op aanvraag
PMCprotego D.24/000/0/0/2/208-480VAC
Uitloop artikel
Technical data at 3 x 400 V AC: Continuous output current: 24 A; Imax
(5 s) = 48 A; Power consumption in S1 mode: 18 kVA Integral brake
resistor.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.72/030/0/C/2/208-480VAC
Uitloop artikel
Technical Details
at 3 x 400 V AC supply voltage:
Permanent output current: 72 A;
Imax (5 sec.) = 140 A;
Power consumption in S1 operation: 50 kVA
necessary accessories: brake resistor 10 OHM
Additonal options:
-Fan controller, card in Slot 2
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.03/010/0/0/2/208-480VAC
Uitloop artikel
Technical data at 3 x 400 V AC: Continuous output current: 3 A; Imax
(2 s) = 9 A; Imax (5 s) = 6 A; Power consumption in S1 mode: 2.2 kVA
Integral brake resistor Further hardware options: Expansion card
PosI/O.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.03/200/0/0/2/208-480VAC
Uitloop artikel
Technical data at 3 x 400 V AC: Continuous output current: 3 A; Imax
(2 s) = 9 A; Imax (5 s) = 6 A; Power consumption in S1 mode: 2.2 kVA
Integral brake resistor Further hardware options: Expansion card
PROFIBUS-DP slave.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.03/100/0/0/2/208-480VAC
Uitloop artikel
Technical data at 3 x 400 V AC: Continuous output current: 3 A; Imax
(2 s) = 9 A; Imax (5 s) = 6 A; Power consumption in S1 mode: 2.2 kVA
Integral brake resistor Further hardware options: Expansion card I/O.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.12/200/0/0/2/208-480VAC
Uitloop artikel
Technical data at 3 x 400 V AC: Continuous output current: 12 A; Imax
(5 s) = 24 A; Power consumption in S1 mode: 9 kVA Integral brake
resistor Further hardware options: Expansion card PROFIBUS-DP slave.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.12/100/0/0/2/208-480VAC
Uitloop artikel
Technical data at 3 x 400 V AC: Continuous output current: 12 A; Imax
(5 s) = 24 A; Power consumption in S1 mode: 9 kVA Integral brake
resistor Further hardware options: Expansion card
I/O.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.24/010/0/P/2/208-480VAC
Uitloop artikel
Base device with increased peak output current Technical data at 3 x
400 V AC: Continuous output current: 24 A; Imax (2 s) = 72 A; Imax (5
s) = 48 A; Power consumption in S1 mode: 18 kVA Integral brake
resistor Further hardware options: Expansion card PosI/O.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.24/200/0/P/2/208-480VAC
Uitloop artikel
Base device with increased peak output current Technical data at 3 x
400 V AC: Continuous output current: 24 A; Imax (2 s) = 72 A; Imax (5
s) = 48 A; Power consumption in S1 mode: 18 kVA Integral brake
resistor Further hardware options: Expansion card PROFIBUS-DP slave.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.06/030/0/C/2/208-480VAC
Uitloop artikel
Technical Details
at 3 x 400 V AC supply voltage:
Permanent output current: 6 A;
Imax (2 sec.) = 18 A; Imax (5 sec.) = 12 A;
Power consumption in S1 operation: 4,5 kVA
Internal brake resistor and mains filter
Additonal options:
-Fan controller, card in Slot 2
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.01/A00/0/0/2/208-480VAC
Uitloop artikel
Technical Details at 3 x 400 V AC supply voltage: Permanent output
current: 3 A; Imax (2 sec.) = 9 A; Imax (5 sec.) = 6 A; Power
consumption in S1 operation: 2,2 kVA;
Internal brake resistor and mains filter; Additional hardware option:
Expansion card PROFINET.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.06/000/0/0/2/110-230VAC
Uitloop artikel
Technical Details
at 3 x 230 V AC supply voltage:
Permanent output current: 6,0 A;
Imax (2 sec.) = 18,0 A; Imax (5 sec.) = 12,0 A;
Power consumption in S1 operation: 2,3 kVA
Internal brake resistor and mains filter
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.01/000/0/0/2/110-230VAC
Uitloop artikel
Technical Details
at 3 x 230 V AC supply voltage:
Permanent output current: 2,5 A;
Imax (2 sec.) = 4,5 A; Imax (5 sec.) = 3,0 A;
Power consumption in S1 operation: 1,0 kVA
Internal brake resistor and mains filter
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.03/A00/0/0/2/110-230VAC
Uitloop artikel
Technical Details
at 3 x 230 AC supply voltage:
Permanent output current: 5,0 A;
Imax (2 sec.) = 9,0 A; Imax (5 sec.) = 6,0 A;
Power consumption in S1 operation: 2,0 kVA
Internal brake resistor and mains filter
additional hardware option: Expansion Card Profinet
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.24/030/0/C/2/208-480VAC
Uitloop artikel
Technical Details
at 3 x 400 V AC supply voltage:
Permanent output current: 24 A;
Imax (5 sec.) = 48 A;
Power consumption in S1 operation: 18 kVA
Internal brake resistor and mains filter
Additonal options:
-Fan controller, card in Slot 2
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.12/000/0/0/2/110-230VAC
Uitloop artikel
Technical Details
at 3 x 230 V AC supply voltage:
Permanent output current: 12,0 A;
Imax (2 sec.) = 24,0 A; Imax (5 sec.) = 24,0 A;
Power consumption in S1 operation: 4,5 kVA
Internal brake resistor and mains filter
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
PMCprotego D.24/000/0/0/2/110-230VAC
Uitloop artikel
Technical Details
at 3 x 230 V AC supply voltage:
Permanent output current: 24,0 A;
Imax (2 sec.) = 48,0 A; Imax (5 sec.) = 48,0 A;
Power consumption in S1 operation: 9,0 kVA
Internal brake resistor and mains filter
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
Op aanvraag
Het product is toegevoegd aan uw winkelmandje
Winkelwagen opslaan
Maak een nieuwe bestelling aan of laat een individuele offerte voor u opstellen.