On network topologies constructed with coaxial cable (e.g. in accordance with 10Base2), the start and end of each segment must be terminated with a resistor. The value of the terminating resistor must correspond to the cable impedance. On 10Base2, this is 50 Ohms.
Pilz lndia Pvt Ltd
6th Floor, ‘Cybernex’, Shankar Seth Road, Swargate,
Pune - 411037
India
Telephone: +91 20 49221100/101/102
E-Mail: info@pilz.in
Telephone: +91 20 49221100/101/102
E-Mail: info@pilz.in