Pilz E-Shop

Sensor technology

Tactile Sensors

PSENmat - Safety mat

Software

SafetyEYE Tools SafetyEYE Configurator is used to configure virtual detection and warning zones.
PSENopt Tools The PSENopt Configurator makes it easier to commission and operate the Advanced light beam devices.

Relay modules

Safety relays / protection relays

PNOZsigma - safety relays The safety relays in minimum width for a multitude of safety functions and fast commissioning and expansion.
PNOZ X - safety relays The safety relays for a wide application area - proven through their reliability and robustness.
PNOZcompact - safety relays The safety relays for basic functions in a compact housing.
PNOZelog - safety relays The electromechanical safety relays guarantee wear-resistance, safety and long service life by means of semiconductor technology.
PNOZpower - safety relays The safety relays for high loads up to 16 A AC/DC per contact and an overall breaking capacity of up to 50 A per module.

Monitoring relays / monitoring devices

PMDsigma - monitoring relays The electronic monitoring relays for monitoring insulation and fault voltage for the electrical safety of your plant.
PMDsrange - monitoring relays The electronic monitoring relays for monitoring voltage, phase sequence, current, insulation, true power, temperature, standstill and fault voltage.

Line monitoring devices

PLIDdys - safe line monitoring devices The line inspection for special line monitoring and or connection testing. For safe two-wire connections up to 3000 m cable length.

Software

PNOZsigma Tools With PNOZsigma Configurator you can set up the speed monitor PNOZ s30 individually via your PC.

Small controllers

Configurable control systems

PNOZmulti 2 - controllers Configurable compact safety control system PNOZmulti. For monitoring safety functions, with display, modular expandable, 45 mm width.
PNOZmulti 2 - I/O modules For modular expansion of control systems. Choose the matching I/O modules including Motion Monitoring, connection of decentralised periphery for each application.
PNOZmulti 2 - communication modules Fieldbus modules for connection to all common fieldbus systems incl. PROFINET, EtherCAT, CC-Link etc., Ethernet and RS-232 communication modules.

Configurable compact controllers

PNOZmulti Mini - controllers Stand-alone / modular expandable control systems, also as rugged version. For monitoring safety functions on smaller plants and machinery.
PNOZmulti Mini - I/O modules Limited number of expansion modules, for connection to decentralised periphery and for connection to base units. Relay expansions PNOZsigma.
PNOZmulti Mini - communication modules Fieldbus modules for connection to all common fieldbus systems incl. PROFIBUS, EtherCAT, Powerlink etc., Ethernet and RS-232 communication modules.

Configurable safety systems

PNOZmulti - controllers Fieldbus modules for connection to all common fieldbus systems incl. PROFIBUS, EtherCAT, DeviceNet, Interbus, CANopen.
PNOZmulti - I/O modules For each safety function the matching modular expansions, incl. safe analogue input module, speed monitor and rugged version.
PNOZmulti - communication modules Fieldbus modules for connection to all common fieldbus systems incl. PROFIBUS, EtherCAT, DeviceNet, Interbus, CANopen.

Software

PNOZmulti Tools Graphics software tool used to configure the safety circuit, to document and commission the compact safety control system PNOZmulti.
PVIS Tools PVIS OPC software tools for diagnostic solution PVIS based on standard software interfaces. PVIS can thus be integrated into almost any environment.

Controller

PLC controllers

PSSuniversal - controllers Control systems for the automation system PSS 4000. Can be used for different applications, configurable with I/O modules.
PSS67 Controller

I/O systems

PSSuniversal - communications modules With the communication modules PSSuniversal, you can implement safety-related, non-safety-related and combined applications.
PSSuniversal - I/O modules Ideal complement for control systems and communication modules of the PSSuniversal range.
PSSuniversal 2 - Communication modules The communication modules PSSuniversal 2 enable safety-related, non-safety-related and combined applications.
PSSuniversal 2 - I/O modules A wide range of electronic modules are available for the next generation of universal I/O systems, enabling the system to be adapted individually to meet your needs.
PSS67 modules Compact module with protection type IP67 for the automation system PSS 4000.
PDP 20 The interface modules are ideal for series connection of contact-based sensors in accordance with EN ISO 13849-1 up to PL e.
PDP 67 For use with protection type IP67; outside the control cabinet the modules forward sensor signals to the control systems.

Software

PAS4000 Engineering software for the PSS 4000 automation system.
PSSuniversal Tools Use PSSuniversal tools for configuring the decentralised I/O system PSSuniversal.

Drive technology

Motion control systems

PMCprimo - motion control systems PMCprimo have PLC, Motion and CNC functionality - for all control and motion tasks.

Servo amplifier

PMCtendo DD - servo drives Servo amplifier for the widest range of motor technologies.
PMCprotego D - servo drives The servo amplifiers PMCprotego D are used as drive controllers when maximum flexibility and safety are essential.
PMCprotego - safe motion Safe stop, motion and brake functions can be implemented directly in the drive.

Motors

PMCtendo - servo motors PMCtendo motors are compact, performance-optimised servo motors.

Software

PASmotion Pilz Motion Control Engineering Tools for configuration, programming and monitoring.

Networks

Fieldbus and Ethernet systems

System components - bus systems For communication between control systems in the automation system PSS 4000 and third-party control systems.
SafetyNET p - system components To improve network expansion and performance in Ethernet networks with SafetyNET p.
SecurityBridge
Revolution Pi With the Revolution Pi, you can use and evaluate your data across plants in order to optimise your processes!

Device Diagnostics System

Safety Device Diagnostics Safety Device Diagnostics (SDD) provides comprehensive diagnostic data. The benefit to you: Reduced service calls and higher availability.

Operating and monitoring

Control and signal devices

PITestop - emergency stop pushbuttons Standard-compliant E-STOP pushbuttons for switching off plants in a hazardous situations. Due to a wide range of versions, it is suitable for every plant environment.
PITsign - muting lamps Muting lamps optically show the muting status of protective devices and they are used for access control of opto-electronically monitored machines.
PITjog - jog switch Manual control unit for use inside a plant's danger zone to manually control functions while the safety gate is open.
PITenable - enabling switch The three-stage enabling switch as a control device for working in a machine's danger zone, when the effect of safety equipment has to be suspended.
PITmode - operating mode selector switch The operating mode selector switch enables manipulation-safe selection of operating mode alongside the control of access authorisations.
PITgatebox - pushbutton unit

Operator terminals

PMIopen - Open hardware platform The operator terminals offer an open hardware platform for diagnostics and visualisation in a large number of display sizes.
PMIvisu - Visualisation system The operator terminals are equipped with the HMI software PASvisu and enable the professional visualisation of plant and machinery.
PMIcontrol - Control and visualisation The operator terminals are equipped with a Soft PLC and, in addition to diagnostics and visualisation, also enable control of plant processes.
Accessories The accessories portfolio for the PMI operator panels.
Software PMI The SCADA software offers a cross-sector solution of complex visualisation tasks for the operator terminals PMIopen und PMIcontrol.

Software

Visualisation Software

PASvisu - HMI Software Web-based visualisation software for simple configuration and optimum visualisation of your automation projects.

Services Software

PAScal Safety Calculator Calculate functional safety in accordance with EN ISO 13849 using the software tool Safety Calculator PAScal.
PASloto Lock Out Tag Out Lockout Tagout documentation software to support the safe energy activation of your machines.

We value your opinion

Pilz E-Shop

Login

Sensor technology

Position monitoring devices

Safety switches

Safety gate systems

Optoelectronic protective devices

Safe camera systems

Tactile Sensors

Software

Relay modules

Safety relays / protection relays

Monitoring relays / monitoring devices

Line monitoring devices

Software

Small controllers

Configurable control systems

Configurable compact controllers

Configurable safety systems

Software

Controller

PLC controllers

I/O systems

Software

Drive technology

Motion control systems

Servo amplifier

Motors

Software

Networks

Fieldbus and Ethernet systems

Device Diagnostics System

Operating and monitoring

Control and signal devices

Operator terminals

Software

Visualisation Software

Services Software