Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
{"id":"584101","name":"PSENvip R LR","price":"0.00","currency":"EUR","category":["A0100","A0100B0140","00106002207043","0010600220704380HZ"]}
Actual product may vary
PSENvip R LR
Product ID: 584101
GTIN: 4046548089653
Le PSENvip R LR est le récepteur du système PSENvip2 pour des portée
spouvant atteindre 18 mètres. L’émetteur PSENvip E est nécessaire comme
contre-pièce.
Remarque importante : cet article est en fin de cycle de vie et ne sera par conséquent plus disponible dans un avenir proche. Veuillez prendre contact avec votre interlocuteur PILZ pour obtenir ...
More
Phase-out article
Item
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer
Select intended use
Le PSENvip R LR est le récepteur du système PSENvip2 pour des portée spouvant atteindre 18 mètres. L’émetteur PSENvip E est nécessaire comme contre-pièce. Remarque importante : cet article est en fin de cycle de vie et ne sera par conséquent plus disponible dans un avenir proche. Veuillez prendre contact avec votre interlocuteur PILZ pour obtenir une alternative ou un produit de remplacement adapté.
Données generales
| Homologation |
UL Listed
CE UKCA TÜV |
| Type d’EPES | 4 |
| Principe du capteur | Optique |
| Largeur max. espace de protec° | 44 mm |
| Résolution indice protection | Doigts |
| Portée (m) | 0.1 m |
Données techniques
Données électriques
| Tension d'alimentation (V) | 5 V |
| Type de tension d’alim. U1 | DC |
| Puissance absorbée DC | 0.8 W |
Données optiques
| Plage longueurs onde utilisée | 510 à 550 nm |
Environmental data
| Vibrations selon norme... | EN 60068-2-6 |
| Température d’utilisation | 0 °C |
| Condensation autorisée ? | non autorisé |
| Sollicit. humidité selon norme | EN 60068-2-78 |
| Indic. soll. due à l’humidité | 93 % d’humidité rel. à 40 °C |
| Norme indice de protection | EN 60529 |
| Indice de protection de boîtie | IP54 |
| Norme température ambiante | EN 60068-2-14 |
| CEM selon norme .... |
EN 61496-1
EN 61000-6-4 |
| Norme température de stockage | EN 60068-2-1/-2 |
| Accél. choc selon la norme 1 | 10g |
| Indice de protection UL (type) | 1 |
Times
| Temps d'appel | 4.65 ms |
Mechanical data
| Constitution du câble | Jeux de câbles |
| Poids net | 2410 g |
| Dimension profondeur | 192 mm |
| Dimensions hauteur | 90 mm |
| Matériau du boîtier partie sup | Aluminium |
| Dimension largeur | 95 mm |
| Longueur de câble max. | 20 m |
| Poids brut | 2680 g |
| Type de raccordement | M12 à 4 broches |
Environment
| WEEE classification (08/2018) | 5 devices (feed size < 50cm) |
Commercial data
| Version du ECLASS | ECLASS-13 |
| Caractéristique de réf. ECLASS | 27310101 |
| Version du ETIM | ETIM-9.0 |
| Groupe de référence du ETIM | EG000026 |
| Caractéristique de réf. ETIM | EC004672 |
| Type de numéro de tarif | TARIC |
| Utilisation Numéro de tarif |
Ausfuhr
Einfuhr |
| Quantité par unité d'emballage | 1 |
| UNSPSC 25 | 39121528 |
| GTIN | 4046548089653 |
| Volume | 12.150 dm3 |
| Harmonized System Code | 85258900 |
Installation accessories
PSSu K F FAU B
312420
PSSu, compact module, failsafe, special module, analysis unit for
PSENvip, basic version, 1 interface PSENvip receiver, 1 interface
PSENvip transmitter, 4 inputs, 2 test pulse outputs 0.25 A, 2 outputs,
1.75 A, single-pole, plus-switching, short circuit-proof, overload-
proof, free from feedback, 2 outputs, 3 A, dual-pole, short circuit-
proof, overload-proof, high discharge voltage, free from feedback, 2
Ethernet interfaces, 100 MBit/s.
Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.
PSSu K F FAU P
312421
PSSu, compact module, failsafe, special module, analysis unit for
PSENvip, productive version, 1 interface PSENvip receiver, 1 interface
PSENvip transmitter, 4 inputs, 2 test pulse outputs 0.25 A, 2 outputs,
1,75 A, single-pole, plus-switching, short-circuit proof, overload-
proof, free from feedback, 2 outputs, 3 A, dual-pole, short-circuit
proof, overload-proof, high discharge voltage, free from feedback, 2
Ethernet interfaces, 100 MBit/s.
Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.
Obligatory accessories
PSEN cable M12-4sm MIOsm MOVE, 5m
584568
Connection lead, PUR, green RAL6018, Ethernet Cat5e, shielded,
suitable for drag chains, 4-pin, connector straight M12 D-coded, onconnector
straight Industrial Mini I/O, cable length: 5 m
PSEN cable M12-4sm MIOsm MOVE, 8m
584569
Connection cable, PUR, green RAL6018, Ethernet Cat5e, shielded,
suitable for drag chains, 4-pin, connector straight M12 D-coded, onconnector
straight Industrial Mini I/O, cable length: 8m
PSEN cable M12-4sm MIOsm MOVE, 10m
584570
Connection cable, PUR, green RAL6018, Ethernet Cat5e, shielded,
suitable for drag chains, 4-pin, connector straight M12 D-coded, onconnector
straight Industrial Mini I/O, cable length: 10m
PSEN cable M12-4sm MIOsm MOVE, 15m
584571
Connection cable, PUR, green RAL6018, Ethernet Cat5e, shielded,
suitable for drag chains, 4-pin, connector straight M12 D-coded, onconnector
straight Industrial Mini I/O, cable length: 15m
PSEN cable M12-4sm MIOsm MOVE, 20m
584572
Connection cable, PUR, green RAL6018, Ethernet Cat5e, shielded,
suitable for drag chains, 4-pin, connector straight M12 D-coded, onconnector
straight Industrial Mini I/O, cable length: 20m
Optional accessories
PSENvip TP
583200
PSENvip test piece for regular function check.
Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.
PSENvip AT mag
583203
Adjustment templates with magnet. To align PSENvip during
installation and tool change.
Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.
PSENvip AT mech
583204
Adjustment templates (installation in tool holder). To align
PSENvip during installation and tool change.
Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.
PSENvip MB
583205
1x set adapter pieces for mounting PSENvip AP on to any
bracket.
Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.
PSENvip MS
583206
1x set supporting arms for installing PSENvip on a press. Additionally
requires PSENvip MB (583205).
Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.
PSENvip AS2
583210
Set of mounting plates for transmitter PSENvip E and receiver PSENvip R.
Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.
PSENvip AP2
583211
Set of mounting plates for transmitter PSENvip E and receiver PSENvip R.
Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.