Thailand en
Hotline
Contact
Thailand | english

How can the control head be reset to the factory default settings?

PLC controllers and I/O systems

Original reset: carry out the following steps <10 s

  • Switch off voltage to PSS
  • Remove SD card
  • Switch on voltage to PSS
  • Press reset button >5s until DIAG-LED flashes
  • Release reset button
  • Press reset button
  • Release reset button

The control head now has the following default settings:

  • Device name: PSS__
  • IP address: 169.254.1.0 to 169.254.254.255 (Auto-IP mechanism)
  • Subnet mask: 255.255.0.0
    SD card can be formatted via a PC.
Top
Contact

Pilz South East Asia (Thailand) Co., Ltd
3, Promphan 3 Building, Unit 1201 - 1202, 12th floor, Soi Lat Phrao 3, Lat Phrao Road, Chom Phon, Chatuchak
Bangkok 10900
Thailand

Telephone: +66 2105 4613
E-Mail: [email protected]

Orders Support

3, Promphan 3 Building, Unit 1201 - 1202, 12th floor, Soi Lat Phrao 3, Lat Phrao Road, Chom Phon, Chatuchak
Bangkok 10900
Thailand

Telephone: +66 2105 4613
E-Mail: [email protected]

Technical Support

Telephone: +66 210 54613
E-Mail: [email protected]

Was this article helpful?
  1. Pilz
    2. /
  2. Support
    3. /
  3. FAQ
    4. /
  4. Products and solutions
Open contact form
Telephone:+66 210 54613
Mail: [email protected]
Cookie settings

What can we do for you?

I understand that, unless I give my consent, any personal data collected will only be used for processing orders and dealing with my enquiries. Further information on data protection and contact details for our data protection officer are available here: Pilz data protection
Consent can be withdrawn at any time (E-Mail will suffice).
* Mandatory field