Phase-out article
Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
PMC Expansion Card Profibus DP Slave
Card can be used in PMCtendo DD5 & PMCprotego.
On request
Brake resistor 300W/91R/T/U
Phase-out article
suitable for the PMCtendo-DD5/480VAC Type: FZECQU 200x65-91
Performance at 40° C/100 % ED: 300 W Resistance value: 91 OHM
Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.
On request
Brake resistor 600W/66R/T/U
Phase-out article
suitable for the PMCtendo-DD5/230VAC Type: FZECQU 400x65-66
Performance at 40° C/100 % ED: 600 W Resistance value: 66 OHM
Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.
On request
Brake resistor 600W/91R/T/U
Phase-out article
suitable for the PMCtendo-DD5/400VAC Type: FZECQU 400x65-91
Performance at 40° C/100 % ED: 600 W Resistance value: 91 OHM
Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.
On request
suitable for PMCtendo-DD4/70A and PMCprotego D/72 Type: FZZCQU
500x65-10 Performance at 40° C/100 % ED: 1600 W Resistance value: 10
OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL
version.
On request
Rated current: 100 A Typ. power dissipation: 24 W Protection class:
IP20 Connection type: Terminals.
On request
suitable for PMCtendo-DD4/40A and PMCprotego D/48 Type: FZZCQU
500x65-15 Performance at 40° C/100 % ED: 1600 W Resistance value: 15
OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL
version.
On request
Brake resistor 300W/66R/T/U
Phase-out article
suitable for the PMCtendo-DD5/230VAC Type: FZECQU 200x65-66
Performance at 40° C/100 % ED: 300 W Resistance value: 66 OHM
Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.
On request
PMCtendo DD5/400 spare part plug + X9
Phase-out article
suitable for the device series PMCtendo DD5/230-480V consisting of:
Connector X3, X4 Connector X0, X8, X9.
On request
PMCprotego S3.SN 8DI 6DO EI BR
Phase-out article
Drive-integral safety card for the servo amplifier series PMCprotego D
implementable safety level: SIL 3 in accordance with EN/IEC 62061
supported safety functions: STO, SS1, SS2, SOS, SLS, SSR, SDI, SBC,
SBT, SLI, SLP.
System requirements for PMCprotego D: Product version 1.6; Firmware >=
6.25
On request
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer