Phase-out article
Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
PMCcable M2/C2B2/010/1Q5/S1
Power cable; Cable assembled on both sides Connector <> con.23 round
connector 8-pin SpeedTec; No. of wires and cross section (4x1.5+1x
(2x1.0)) suitable for PMCprotego D.01-24 and the motors PMCtendo
SZ.4x…K bis SZ.73…K; Length 10 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMCtendo DD5/400 spare part plug + X9
Phase-out article
suitable for the device series PMCtendo DD5/230-480V consisting of:
Connector X3, X4 Connector X0, X8, X9.
On request
PMCprotegoD 01-24 spare part plug set
Phase-out article
suitable for the device series PMCprotegoD 01-24 consisting of:
Connector X3A, X3B, X4A, X4B Connector X0, X8.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMCcable M2/C2B5/005/1Q0/S1
Phase-out article
Power cable; Cable assembled on both sides Connector <> con.15 round
connector 9-pin SpringTec; No. of wires and cross section (4x1,0+1x
(2x1,0))suitable for PMCprotego D.01-24 and the motors PMCtendo SZ.3x;
Length 5 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMCcable FD/D4B8/005/Q25/S1
Phase-out article
Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15
connector <> con.15 round connector 12-pin SpringTec; suitable for all
PMC servo controllers (DD5, protego) and the motors PMCtendo SZ.3x;
Length 5 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMC Expansion Card PROFINET
Phase-out article
Card can be used in PMCtendo DD5 & PMCprotego D.
On request
PMCprotego D connector set X8Y + X4A
Phase-out article
Set consists of
connector X8Y Push in spring connection
connector X4A Screw connection with tension sleeve
for device to 24A
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMCprotego D connector X0Y
Phase-out article
connector X0Y Push in spring connection
for device to 24A
Important information: This item is at the end of the product
lifecycleand therefore will no longer be available in the foreseeable
future.Please get in touch with your PILZ contact to find a
suitablealternative or successor product.
On request
PMCcable M2/C2B5/010/1Q0/S1
Phase-out article
Power cable; Cable assembled on both sides Connector <> con.15 round
connector 9-pin SpringTec; No. of wires and cross section (4x1,0+1x
(2x1,0))suitable for PMCprotego D.01-24 and the motors PMCtendo SZ.3x;
Length 10 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMCcable FD/D4B8/010/Q25/S1
Phase-out article
Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15
connector <> con.15 round connector 12-pin SpringTec; suitable for all
PMC servo controllers (DD5, protego) and the motors PMCtendo SZ.3x;
Length 10 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMCprotegoD 01-24 spare part plug set
Phase-out article
suitable for the device series PMCprimo MC consisting of:
X40a, X40b and X50a, X50b, X50c
On request
PMCprimo C. spare part plug X40
Phase-out article
Replacement connector for the controller card PMCprimo C at the
interface X40.
On request
Cable PMCprimo mini-I/O>enc. SubD9 0,75m
Phase-out article
Adapter cable for encoder; Cable assembled on both sides: mini-I/O <>
SUBD9; No. of wires and cross section: 4x2x0,14mm²; suitable for
PMCprimo C2 and PMCpimo MC; Length 0,75m;
On request
PMCprimo C2. Ersatz Steckersatz
Phase-out article
suitable for the device series PMCprimo C2 consisting of:
X40a, X40b
On request
PMC brakeresistor FGFKQU31005/22R/2500W
Phase-out article
Braking resistoer for power supply PS6.
Technical data:
Type Steel-grid fixed resistor.
Resistance 22 Ohm.
Power 2500 W.
with temperature switch.
with UL certification.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMC brakeresistor GBADU265x30/100R/300W
Phase-out article
Braking resistoer for drive controller SC6 and SD6.
Technical data:
Type Flat resistor.
Resistance 100 Ohm.
Power 300 W.
with UL certification.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMC brakeresistor KWADQU420x91/100R/600W
Phase-out article
Braking resistoer for power supply PS6.
Technical data:
Type Flat resistor with mounting bracket MWS306L.
Resistance 100 Ohm.
Power 600 W.
with temperature switch.
with UL certification.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMC brakeresistor GBADU335x30/47R/400W
Phase-out article
Braking resistoer for drive controller SC6 and SD6.
Technical data:
Type Flat resistor.
Resistance 47 Ohm.
Power 400 W.
with UL certification.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMC brakeresistor GVADU210x20/100R/150W
Phase-out article
Braking resistoer for drive controller SC6 and SD6.
Technical data:
Type Flat resistor.
Resistance 100 Ohm.
Power 150 W.
with UL certification.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMC brakeresistor FZZMU400x65/47R/1200W
Phase-out article
Braking resistoer for drive controller SC6 and SD6.
Technical data:
Type Tubular fixed resistor.
Resistance 47 Ohm.
Power 1200 W.
with UL certification.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer