Phase-out article
Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
Brake resistor 1600W/23R/T/U
suitable for the PMCprotego D/24A Type: FZZCQU 500 x 65-23 Performance
at 40? C/100 % ED: 1600 W Resistance value: 23 OHM Temperature switch
180? C: Signal contact 2A/24 V DC (DC11) UL version.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMCtendo DD4.CAN-Adapter Slot version
Phase-out article
Use in PMCtendo DD4 and DD5 Interfaces: CAN-in, CAN-out, RS232 with
termination and monitoring voltage switch.
On request
Rated current: 42 A Typ. power dissipation: 15 W Protection class:
IP20 Connection type: Terminals.
On request
Mains filter Rated current: 7 A, power dissipation typ.: 4 W
Protection class: IP20, connection type: Terminals.
On request
Mains filter Rated current: 30 A, power dissipation typ.: 12 W
Protection class: IP20, connection type: Terminals.
On request
Mains filter Rated current: 16 A, power dissipation typ.: 8 W
Protection class: IP20, connection type: Terminals.
On request
PMCprotego D.CAN-Adapter 01-24A
Phase-out article
Fieldbus junction box for PMCprotego D (size 1.5 A to 24 A) Interfaces:
CAN-in, CAN-out, RS232 with termination and monitoring voltage switch.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMC Expansion Card PosI/O
Phase-out article
Card can be used in PMCprotego Connector X5 (e.g. for Encoder
emulation).
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMC Expansion Card Profibus DP Slave
Phase-out article
Card can be used in PMCtendo DD5 & PMCprotego.
On request
PMC Expansion Card PosI/O-AIO
Phase-out article
Card can be used in PMCprotego Connector X5 (e.g. for Encoder
emulation) Connector X3C (2 analogue inputs and 2 analogue outputs).
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMCprotego D.CAN-Adapter 48-72A
Phase-out article
Fieldbus junction box for PMCprotego D (size 48 A and 72 A) Interfaces:
CAN-in, CAN-out, RS232 with termination and monitoring voltage switch.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
Fieldbus junction box for PMCprimo DriveP (size 1.5 A to 24 A)
Interfaces: CAN1, RS232 and CAN2 with termination switch and RJ45
cable to connect the fieldbus junction box to the PMCprimo C.
On request
Fieldbus junction box for PMCprimo DriveP (size 1.5 A to 24 A)
Interfaces: CANbus, RS 232 and PROFIBUS with termination switch and
RJ45 cable to connect the fieldbus junction box to the PMCprimo C.
On request
Fieldbus junction box for PMCprimo DriveP (size 48 A and 72 A)
Interfaces: CANbus, RS 232 and PROFIBUS with termination switch and
RJ45 cable to connect the fieldbus junction box to the PMCprimo C.
On request
Fieldbus junction box for PMCprimo DriveP (size 48 A and 72 A)
Interfaces: CAN1, RS 232 and CAN2 with termination switch and RJ45
cable to connect the fieldbus junction box to the PMCprimo C.
On request
PMCcable M2/C2B2/015/1Q5/S1
Phase-out article
Power cable; Cable assembled on both sides Connector <> con.23 round
connector 8-pin SpeedTec; No. of wires and cross section (4x1.5+1x
(2x1.0)) suitable for PMCprotego D.01-24 and the motors PMCtendo
SZ.4x…K bis SZ.73…K; Length 15 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMCcable M2/C2B2/005/1Q5/S1
Phase-out article
Power cable; Cable assembled on both sides Connector <> con.23 round
connector 8-pin SpeedTec; No. of wires and cross section (4x1.5+1x
(2x1.0)) suitable for PMCprotego D.01-24 and the motors PMCtendo
SZ.4x…K bis SZ.73…K; Length 5 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMCcable FD/D4B6/015/Q25/S1
Phase-out article
Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15
connector <> con.23 round connector 12-pin SpeedTec; suitable for all
PMC servo controllers (DD5, protego) and the motors PMCtendo SZ4x to
SZ8x; Length: 15 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMCcable FD/D4B6/010/Q25/S1
Phase-out article
Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15
connector <> con.23 round connector 12-pin SpeedTec; suitable for all
PMC servo controllers (DD5, protego) and the motors PMCtendo SZ4x to
SZ8x; Length: 10 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
PMCcable FD/D4B6/005/Q25/S1
Phase-out article
Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15
connector <> con.23 round connector 12-pin SpeedTec; suitable for all
PMC servo controllers (DD5, protego) and the motors PMCtendo SZ4x to
SZ8x; Length: 5 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
On request
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer