text.skipToContent text.skipToNavigation
Close 

You are on the Pilz international website



Please select a language or switch to a country
Choose your country to get national content
  1. Home
  2. Drive technology
434 Products found
PMCcable FD/G4G8/005/Q25/S1
8C000103
GTIN: 4046548101218
PMCcable FD/G4G8/005/Q25/S1

Phase-out article

Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.15 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ301 to EZ303. Length 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C5/015/1Q0/S1
8C000129
GTIN: 4046548101751
PMCcable M3/E1C5/015/1Q0/S1

Phase-out article

Power cable. Cable assembled on both sides Crimp connectors <> con.15 round connector 8-pin. No. of wires and cross section (4 × 1,0 + (2 × 0,5) + (2 × 0,34)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors EZ301 to EZ303. Length 15 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable FD/G4G8/020/Q25/S1
8C000106
GTIN: 4046548101522
PMCcable FD/G4G8/020/Q25/S1

Phase-out article

Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.15 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ301 to EZ303. Length 20 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC DL6B20 Quick DC-Link > PS6A2
8C000089
GTIN: 4046548101041
PMC DL6B20 Quick DC-Link > PS6A2

Phase-out article

Rear section module for size 2 supply module: PS6A24 # The quick fastening clamps for attaching the copper rails and an insulation connection piece are contained in the scope of delivery. The copper rails are not included in the scope of delivery. These must have a cross-section of 5 x 12 mm. Insulation end sections are available separately. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable FD/G4G8/2m5/Q25/S1
8C000107
GTIN: 4046548101539
PMCcable FD/G4G8/2m5/Q25/S1

Phase-out article

Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.15 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ301 to EZ303. Length 2,5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC output choke TEP3720-OES41 4A
8C000099
GTIN: 4046548101065
PMC output choke TEP3720-OES41 4A

Phase-out article

Output choke TEP3720-OES41 from a cable lenght > 50m, maximum of 100m Technical data: Voltage range 3x <480 VAC. Frequency range 0-200 Hz. Nominal current 4 A @ 4kHz / 3,3 A @ 8kHz. Inductance 3,2 mH. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C5/020/1Q0/S1
8C000130
GTIN: 4046548101768
PMCcable M3/E1C5/020/1Q0/S1

Phase-out article

Power cable. Cable assembled on both sides Crimp connectors <> con.15 round connector 8-pin. No. of wires and cross section (4 × 1,0 + (2 × 0,5) + (2 × 0,34)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors EZ301 to EZ303. Length 20 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable FD/G4G8/010/Q25/S1
8C000104
GTIN: 4046548101225
PMCcable FD/G4G8/010/Q25/S1

Phase-out article

Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.15 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ301 to EZ303. Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable FD/G4GB/005/Q25/S1
8C000109
GTIN: 4046548101553
PMCcable FD/G4GB/005/Q25/S1

Phase-out article

Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.17 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ40-EZ80. Length 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC power choke TEP4010-2US00 100A
8C000102
GTIN: 4046548100990
PMC power choke TEP4010-2US00 100A

Phase-out article

Netzdrossel TEP4010-2US00 Technical data: Voltage range 3x 400 VAC. Frequency range 50/60 Hz. Nominal current 90 A. Inductance 0,14 mH. Required for drive controllers from SD6A34. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C3/2m5/6Q0/S1
8C000137
GTIN: 4046548101256
PMCcable M3/E1C3/2m5/6Q0/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.40 round connector 8-pin. No. of wires and cross section (4 × 6,0 + (2 × 1,5) + (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ705. Length 2,5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C5/010/1Q0/S1
8C000128
GTIN: 4046548101744
PMCcable M3/E1C5/010/1Q0/S1

Phase-out article

Power cable. Cable assembled on both sides Crimp connectors <> con.15 round connector 8-pin. No. of wires and cross section (4 × 1,0 + (2 × 0,5) + (2 × 0,34)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors EZ301 to EZ303. Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable FD/G4G8/015/Q25/S1
8C000105
GTIN: 4046548101232
PMCcable FD/G4G8/015/Q25/S1

Phase-out article

Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.15 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ301 to EZ303. Length 15 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C2/010/2Q5/S1
8C000140
GTIN: 4046548101294
PMCcable M3/E1C2/010/2Q5/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.23 round connector 8-pin. No. of wires and cross section (4 × 2,5 + 2 × (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ503 to EZ703. Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C2/005/2Q5/S1
8C000139
GTIN: 4046548101270
PMCcable M3/E1C2/005/2Q5/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.23 round connector 8-pin. No. of wires and cross section (4 × 2,5 + 2 × (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ503 to EZ703. Length 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C2/020/2Q5/S1
8C000142
GTIN: 4046548101911
PMCcable M3/E1C2/020/2Q5/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.23 round connector 8-pin. No. of wires and cross section (4 × 2,5 + 2 × (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ503 to EZ703. Length 20 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C2/010/4Q0/S1
8C000146
GTIN: 4046548101959
PMCcable M3/E1C2/010/4Q0/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.23 round connector 8-pin. No. of wires and cross section (4 × 4,0 + (2 × 1,0) + (2 × 0,75)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ702 to EZ703. Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C2/005/4Q0/S1
8C000145
GTIN: 4046548101942
PMCcable M3/E1C2/005/4Q0/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.23 round connector 8-pin. No. of wires and cross section (4 × 4,0 + (2 × 1,0) + (2 × 0,75)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ702 to EZ703. Length 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C2/2m5/2Q5/S1
8C000143
GTIN: 4046548101928
PMCcable M3/E1C2/2m5/2Q5/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.23 round connector 8-pin. No. of wires and cross section (4 × 2,5 + 2 × (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ503 to EZ703. Length 2,5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C2/015/2Q5/S1
8C000141
GTIN: 4046548101904
PMCcable M3/E1C2/015/2Q5/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.23 round connector 8-pin. No. of wires and cross section (4 × 2,5 + 2 × (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ503 to EZ703. Length 15 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request

Save basket

Create a new order or get an individual offer

Select intended use