Phase-out article
Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
PMCtendo DD5.03/000/0/0/0/110-230VAC
Servo amplifiers Technical data at 3 x 230 V AC: Continuous output
current:
3 A; Imax (5 s) = 9 A; Power consumption in S1 mode: 1.1 kVA Integral
brake resistor
On request
PMCtendo DD5.01/000/0/0/0/208-480VAC
Phase-out article
Servo amplifiers Technical data at 3 x 400 V AC: Continuous output
current:
1.5 A; Imax (5 s) = 4.5 A; Power consumption in S1 mode: 1.2 kVA
Integral brake resistor
On request
PMCtendo DD5.06/112/115-230VAC
Phase-out article
Servo amplifiers Technical data at 3 x 230 V AC: Continuous output
current:
6 A; Imax (5 s) = 15 A; Power consumption in S1 mode: 2.4 kVA Integral
brake resistor
On request
PMCtendo DD5.03/000/0/0/0/208-480VAC
Phase-out article
Servo amplifiers Technical data at 3 x 400 V AC: Continuous output
current:
4 A, Imax (5 s) = 7.5A Power consumption in S1 mode: 2.5 kVA Integral
brake resistor
On request
PMCtendo DD5.06/000/0/0/0/208-480VAC
Phase-out article
Servo amplifiers Technical data at 3 x 400 V AC: Continuous output
current:
6 A; Imax (5 s) = 12 A; Power consumption in S1 mode: 5 kVA Integral
brake resistor
On request
PMCtendo DD5.10/000/0/0/0/110-230VAC
Phase-out article
Servo amplifiers Technical data at 3 x 230 V AC: Continuous output
current:
10 A; Imax (5 s) = 20 A; Power consumption in S1 mode: 4 kVA Integral
brake resistor
On request
PMCtendo DD4.06/167/230-480V
Phase-out article
Technical data at 3 x 400 V AC: Continuous output current: 6 A, Imax
(5 s) = 12A Power consumption in S1 mode: 4 kVA Integral brake
resistor incl. relay AS (restart interlock) incl. PROFIBUS-DP
Interface card for data exchange - Support of the drive profile
PROFIBUS with PROFIdrive - Baud rates 187.5 kBaud to 12 MBaud.
On request
PMCtendo DD5.03/A00/0/0/0/208-480VAC
Phase-out article
Servo amplifiers
Technical Details
at 3 x 400 V AC supply voltage:
Permanent output current: 4 A;
Imax (5 sec.) = 7,5 A;
Power consumption in S1 operation: 2,5 kVA
Internal brake resistor and mains filter
additional hardware option: Expansion Card Profinet
On request
PMCtendo DD5.06/A00/0/0/0/208-480VAC
Phase-out article
Servo amplifier, technical details at 3 x 400 V AC: Continuous outputcurrent: 6 A,
Imax (5 sec.) = 12 A, power consumption at S1 operation: 5 kVA,
integrated brake resistor and mains filter, included hardware option:
expansion card Profinet.
On request
PMCtendo DD5.03/A00/0/0/0/110-230VAC
Phase-out article
Servo amplifiers
Technical Details
at 3 x 230 V AC supply voltage:
Permanent output current: 3 A;
Imax (5 sec.) = 9 A;
Power consumption in S1 operation: 1,1 kVA
Internal brake resistor and mains filter
additional hardware option: Expansion Card Profinet
On request
PMCprotego D.06/01G/0/0/2/208-480VAC
Phase-out article
Servo amplifier, continuous output current at 3 x 400 VAC: 6 A,
Peak output current for 2 s: 18 A, peak output current for 5 s: 12 A,
power consumption in S1 mode: 4.5 kVA, integrated brake resistor,
hardware options: expansion card PMCprotego S3.SN 8DI 6DO EI BR,
expansion card PosI/O.
On request
PMCtendo DD4 spare part BGR connectors
Phase-out article
consisting of: Connector X3, X4, X7, X8 Connector 0A, 0B.
On request
PMCtendo DD4 motor connector kit
Phase-out article
Connector kit "X9", for device sizes up to 20 A.
On request
PMCtendo DD4 D1 I/O-Karte
Phase-out article
Expansion card with 14 inputs and 8 outputs can be used in PMCtendo
DD4 & PMCtendo DD5 & PMCprotego.
On request
PMCtendo DD4 Profibus card
Phase-out article
Expansion card PROFIBUS-DP slave 187.5 KBaud - 12 Mbaud, only for
PMCtendo-DD4 Note: Operating the PROFIBUS card is not possible with
controller firmware version 5.16.
On request
PMCtendo DD4.CAN-Adapter Slot version
Phase-out article
Use in PMCtendo DD4 and DD5 Interfaces: CAN-in, CAN-out, RS232 with
termination and monitoring voltage switch.
On request
Rated current: 42 A Typ. power dissipation: 15 W Protection class:
IP20 Connection type: Terminals.
On request
Mains filter Rated current: 7 A, power dissipation typ.: 4 W
Protection class: IP20, connection type: Terminals.
On request
Mains filter Rated current: 30 A, power dissipation typ.: 12 W
Protection class: IP20, connection type: Terminals.
On request
Mains filter Rated current: 16 A, power dissipation typ.: 8 W
Protection class: IP20, connection type: Terminals.
On request
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer