text.skipToContent text.skipToNavigation
Close 

You are on the Pilz international website



Please select a language or switch to a country
Choose your country to get national content
  1. Home
  2. Sensor technology
956 Products found
PSEN op4F-s-14-045/1
630742
GTIN: 4046548062083
PSEN op4F-s-14-045/1
Safety light guard, Type 4, PL e, finger protection (resolution 14 mm), protected field height 450 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 8-pin, connection cable not supplied with the device.

On request
PSEN op4F-s-14-150/1
630749
GTIN: 4046548062151
PSEN op4F-s-14-150/1
Safety light guard, Type 4, PL e, finger protection (resolution 14 mm), protected field height 1500 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 8-pin, connection cable not supplied with the device.

On request
PSEN op4F-s-14-105/1
630746
GTIN: 4046548062120
PSEN op4F-s-14-105/1
Safety light guard, Type 4, PL e, finger protection (resolution 14 mm), protected field height 1050 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 8-pin, connection cable not supplied with the device.

On request
PSEN op4F-s-14-060/1
630743
GTIN: 4046548062090
PSEN op4F-s-14-060/1
Safety light guard, Type 4, PL e, finger protection (resolution 14 mm), protected field height 600 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 8-pin, connection cable not supplied with the device.

On request
PSEN op4F-s-14-120/1
630747
GTIN: 4046548062137
PSEN op4F-s-14-120/1
Safety light guard, Type 4, PL e, finger protection (resolution 14 mm), protected field height 1200 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 8-pin, connection cable not supplied with the device.

On request
PSEN cs3.1b /PSEN cs3.1 1unit
541012
GTIN: 4046548073805
PSEN cs3.1b /PSEN cs3.1 1unit
RFiD safety switch 2 safe SC outputs, connection cable 10 m, one actuation direction, support for SDD, IP6K9K, switching distance 11 mm, Sao = 8 mm, Sar = 20 mm, PU = 1 piece coded switch with actuator.

On request
PSEN enc s2 eCAM
544012
GTIN: 4046548074277
PSEN enc s2 eCAM
Absolute encoder, single-turn, with two redundant SSI interfaces, solid shaft 10 mm, feather key.

On request
PSEN ma1.3b-29/PSEN ma1.3-08/8mm/1 unit
506219
GTIN: 4046548075007
PSEN ma1.3b-29/PSEN ma1.3-08/8mm/1 unit
Magnetic safety switch 3 n/o, round M12 design, IP65, LED, operating distance 8 mm, PU = 1 piece with M12 actuator, with 10 m cable (PUR).

On request
PSEN op2H-A-30-075/1
631043
GTIN: 4046548075588
PSEN op2H-A-30-075/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 750 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request
PSEN op2H-A-30-105/1
631045
GTIN: 4046548075601
PSEN op2H-A-30-105/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 1050 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request
PSEN op2H-A-30-060/1
631042
GTIN: 4046548075571
PSEN op2H-A-30-060/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 600 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request
PSEN op2H-A-30-045/1
631041
GTIN: 4046548075564
PSEN op2H-A-30-045/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 450 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request
PSEN op2H-A-30-030/1
631040
GTIN: 4046548075557
PSEN op2H-A-30-030/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 300 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request
PSEN op4F-A-14-120/1
631006
GTIN: 4046548075717
PSEN op4F-A-14-120/1
Safety light guard, Type 4, PL e, finger protection (resolution 14 mm), protected field height 1200 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request
PSEN op2H-A-30-150/1
631048
GTIN: 4046548075632
PSEN op2H-A-30-150/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 1500 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request
PSEN op4F-A-14-105/1
631005
GTIN: 4046548075700
PSEN op4F-A-14-105/1
Safety light guard, Type 4, PL e, finger protection (resolution 14 mm), protected field height 1050 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request
PSEN op2H-A-30-165/1
631049
GTIN: 4046548075649
PSEN op2H-A-30-165/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 1650 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request
PSEN op4H-A-30-135/1
631027
GTIN: 4046548075823
PSEN op4H-A-30-135/1
Safety light guard, Type 4, PL e hand protection (resolution 30 mm), protected field height 1350 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request
PSEN op4F-A-14-090/1
631004
GTIN: 4046548075496
PSEN op4F-A-14-090/1
Safety light guard, Type 4, PL e, finger protection (resolution 14 mm), protected field height 900 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request
PSEN op4F-A-14-165/1
631009
GTIN: 4046548075748
PSEN op4F-A-14-165/1
Safety light guard, Type 4, PL e finger protection (resolution 14 mm), protected field height 1650 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request

Save basket

Create a new order or get an individual offer

Select intended use