text.skipToContent text.skipToNavigation
Close 

You are on the Pilz international website



Please select a language or switch to a country
Choose your country to get national content
  1. Home
  2. Drive technology
434 Products found
PMCcable M3/E1C3/005/10Q/S1
8C000151
GTIN: 4046548101867
PMCcable M3/E1C3/005/10Q/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.40 round connector 8-pin. No. of wires and cross section (4 × 10,0 + (2 × 1,5) + (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ802 to EZ803. Length 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C2/015/1Q5/S1
8C000171
GTIN: 4046548102123
PMCcable M3/E1C2/015/1Q5/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.23 round connector 8-pin. No. of wires and cross section (4 × 1,5 + (2 × 1,0) + (2 × 0,50)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ401 to EZ703. Length 15 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C2/005/1Q5/S1
8C000169
GTIN: 4046548102208
PMCcable M3/E1C2/005/1Q5/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.23 round connector 8-pin. No. of wires and cross section (4 × 1,5 + (2 × 1,0) + (2 × 0,50)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ401 to EZ703. Length 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C2/020/1Q5/S1
8C000172
GTIN: 4046548102130
PMCcable M3/E1C2/020/1Q5/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.23 round connector 8-pin. No. of wires and cross section (4 × 1,5 + (2 × 1,0) + (2 × 0,50)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ401 to EZ703. Length 20 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C2/2m5/1Q5/S1
8C000173
GTIN: 4046548102147
PMCcable M3/E1C2/2m5/1Q5/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.23 round connector 8-pin. No. of wires and cross section (4 × 1,5 + (2 × 1,0) + (2 × 0,50)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ401 to EZ703. Length 2,5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C2/010/1Q5/S1
8C000170
GTIN: 4046548102116
PMCcable M3/E1C2/010/1Q5/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.23 round connector 8-pin. No. of wires and cross section (4 × 1,5 + (2 × 1,0) + (2 × 0,50)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ401 to EZ703. Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCtendo DD4 motor connector kit
4105424
GTIN: 4046548032901
PMCtendo DD4 motor connector kit

Phase-out article

Connector kit "X9", for device sizes up to 20 A.

On request
PMCtendo DD4 D1 I/O-Karte
4105531
GTIN: 4046548032680
PMCtendo DD4 D1 I/O-Karte

Phase-out article

Expansion card with 14 inputs and 8 outputs can be used in PMCtendo DD4 & PMCtendo DD5 & PMCprotego.

On request
PMCtendo DD4 Profibus card
4105779
GTIN: 4046548041378
PMCtendo DD4 Profibus card

Phase-out article

Expansion card PROFIBUS-DP slave 187.5 KBaud - 12 Mbaud, only for PMCtendo-DD4 Note: Operating the PROFIBUS card is not possible with controller firmware version 5.16.

On request
PMCtendo DD4.CAN-Adapter Slot version
8163583
GTIN: 4046548041422
PMCtendo DD4.CAN-Adapter Slot version

Phase-out article

Use in PMCtendo DD4 and DD5 Interfaces: CAN-in, CAN-out, RS232 with termination and monitoring voltage switch.

On request
Line filter f. DD FFU 3X42K-KK
8166771
GTIN: 4046548035803
Line filter f. DD FFU 3X42K-KK
Rated current: 42 A Typ. power dissipation: 15 W Protection class: IP20 Connection type: Terminals.

On request
Line filter f. DD FFU 3X07K-KK
8171507
GTIN: 4046548035827
Line filter f. DD FFU 3X07K-KK
Mains filter Rated current: 7 A, power dissipation typ.: 4 W Protection class: IP20, connection type: Terminals.

On request
Line filter f. DD FFU 3X30K-KK
8170535
GTIN: 4046548035810
Line filter f. DD FFU 3X30K-KK
Mains filter Rated current: 30 A, power dissipation typ.: 12 W Protection class: IP20, connection type: Terminals.

On request
Line filter f. DD FFU 3X16K-KK
8171509
GTIN: 4046548035834
Line filter f. DD FFU 3X16K-KK
Mains filter Rated current: 16 A, power dissipation typ.: 8 W Protection class: IP20, connection type: Terminals.

On request
PMCprotego D.CAN-Adapter 01-24A
8176300
GTIN: 4046548056891
PMCprotego D.CAN-Adapter 01-24A

Phase-out article

Fieldbus junction box for PMCprotego D (size 1.5 A to 24 A) Interfaces: CAN-in, CAN-out, RS232 with termination and monitoring voltage switch. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC Expansion Card PosI/O
8176278
GTIN: 4046548057928
PMC Expansion Card PosI/O

Phase-out article

Card can be used in PMCprotego Connector X5 (e.g. for Encoder emulation). Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC Expansion Card Profibus DP Slave
8176280
GTIN: 4046548057935
PMC Expansion Card Profibus DP Slave

Phase-out article

Card can be used in PMCtendo DD5 & PMCprotego.

On request
PMCprotego motor connector kit
8176330
GTIN: 4046548057942
PMCprotego motor connector kit

Phase-out article

consisting of connector X9 and shielded terminal for devices up to 24 A. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
Brake resistor 600W/23R/T/U
8176332
GTIN: 4046548059236
Brake resistor 600W/23R/T/U

Phase-out article

suitable for the PMCprotego D/24A Type: FZECQU 400x65-23 Performance at 40? C/100 % ED: 600 W Resistance value: 23 OHM Temperature switch 180? C: Signal contact 2A/24 V DC (DC11) UL version. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
Brake resistor 300W/91R/T/U
8176092
GTIN: 4046548059212
Brake resistor 300W/91R/T/U

Phase-out article

suitable for the PMCtendo-DD5/480VAC Type: FZECQU 200x65-91 Performance at 40° C/100 % ED: 300 W Resistance value: 91 OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.

On request

Save basket

Create a new order or get an individual offer

Select intended use