text.skipToContent text.skipToNavigation
Close 

You are on the Pilz international website



Please select a language or switch to a country
Choose your country to get national content
  1. Home
  2. Drive technology
434 Products found
PMC SC6A162X/EC 2X 10A
8C000194
GTIN: 4046548110722
PMC SC6A162X/EC 2X 10A

Phase-out article

Stand-alone PMC SC6 drive controller Technical data at 3 x 400 V AC: Nominal output current: 2x 10 A @ 4kHz / 2x 9.0 A @ 8kHz. Imax: 210% for 2s / 250% for 2s. Apparent power: 2x 6.95 KVA. Without brake resistor. Option: Safety module SX6 (safety functions in accordance with EN 61800-5-2 using FSoE) and EtherCat. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC EZ705BDAPC5O140
8G000033
GTIN: 4046548111217
PMC EZ705BDAPC5O140

Phase-out article

EZ-Servo motors: Mo = 41,8Nm; Io = 26,5A; UN = 400V; nN = 3000min-1; Jmot = 34kgcm2; Encoder ECI 1118-G2 EnDat2.2 singleturn; without brake; with Forced ventilation.

On request
PMCtendo SZ.71/1/1/2/7/K/H/30/00
8177508
GTIN: 4046548105377
PMCtendo SZ.71/1/1/2/7/K/H/30/00

Phase-out article

Mo = 8.3 Nm Io = 8.0 A UN = 400 V nN = 3000 min-1 Jmot = 10.243 kgcm2 Encoder ECI 1118 EnDat2.2 single-turn; with brake. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCtendo SZ.44/1/2/2/7/K/H/60/00
8177509
GTIN: 4046548105476
PMCtendo SZ.44/1/2/2/7/K/H/60/00

Phase-out article

Mo = 8.40 Nm; Io = 9.78 A; UN = 400 V; nN = 6000 min-1; Jmot = 3.546 kgcm2; Encoder EQN 1135 EnDat2.2 multiturn; without brake. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC DL6B Quick DC-Link isolations end
8C000085
GTIN: 4046548100945
PMC DL6B Quick DC-Link isolations end

Phase-out article

Insulation end sections for the left and right termination of the group, 2 pcs. (SI6 & SC6) Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC DL6B11 Quick DC-Link > SC/SI6A1_2
8C000087
GTIN: 4046548100969
PMC DL6B11 Quick DC-Link > SC/SI6A1_2

Phase-out article

Rear section module for drive controllers of size 1 or 2: SC6A162, SC6A261, SI6A161, SI6A162, SI6A261 # The quick fastening clamps for attaching the copper rails and an insulation connection piece are contained in the scope of delivery. The copper rails are not included in the scope of delivery. These must have a cross-section of 5 x 12 mm. Insulation end sections are available separately. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC DL6B12 Quick DC-Link > SI6A2_3
8C000088
GTIN: 4046548100983
PMC DL6B12 Quick DC-Link > SI6A2_3

Phase-out article

Rear section module for drive controllers of size 2 or 3: SI6A262, SI6A361 # The quick fastening clamps for attaching the copper rails and an insulation connection piece are contained in the scope of delivery. The copper rails are not included in the scope of delivery. These must have a cross-section of 5 x 12 mm. Insulation end sections are available separately. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C3/010/6Q0/S1
8C000134
GTIN: 4046548101805
PMCcable M3/E1C3/010/6Q0/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.40 round connector 8-pin. No. of wires and cross section (4 × 6,0 + (2 × 1,5) + (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ705. Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable FD/G4GB/010/Q25/S1
8C000110
GTIN: 4046548101560
PMCcable FD/G4GB/010/Q25/S1

Phase-out article

Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.17 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ40-EZ80. Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C3/015/6Q0/S1
8C000135
GTIN: 4046548101812
PMCcable M3/E1C3/015/6Q0/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.40 round connector 8-pin. No. of wires and cross section (4 × 6,0 + (2 × 1,5) + (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ705. Length 15 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C3/020/6Q0/S1
8C000136
GTIN: 4046548101249
PMCcable M3/E1C3/020/6Q0/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.40 roundconnector 8-pin. No. of wires and cross section (4 × 6,0 + (2 × 1,5) + (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ705. Length 20 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable FD/G4GB/2m5/Q25/S1
8C000113
GTIN: 4046548101591
PMCcable FD/G4GB/2m5/Q25/S1

Phase-out article

Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.17 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ40-EZ80. Length 2,5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC output choke TEP4020-0RS41 38A
8C000101
GTIN: 4046548101089
PMC output choke TEP4020-0RS41 38A

Phase-out article

Output choke TEP4020-0RS41 from a cable lenght > 50m, maximum of 100m Technical data: Voltage range 3x <480 VAC. Frequency range 0-200 Hz. Nominal current 38 A @ 4kHz / 30,4 A @ 8kHz. Inductance 0,42 mH. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable FD/G4GB/015/Q25/S1
8C000111
GTIN: 4046548101577
PMCcable FD/G4GB/015/Q25/S1

Phase-out article

Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.17 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ40-EZ80. Length 15 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable FD/G4GB/020/Q25/S1
8C000112
GTIN: 4046548101584
PMCcable FD/G4GB/020/Q25/S1

Phase-out article

Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.17 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ40-EZ80. Length 20 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC DL6B21 Quick DC-Link > PS6A3
8C000090
GTIN: 4046548101058
PMC DL6B21 Quick DC-Link > PS6A3

Phase-out article

Rear section module for size 3 supply module: PS6A34 # The quick fastening clamps for attaching the copper rails and an insulation connection piece are contained in the scope of delivery. The copper rails are not included in the scope of delivery. These must have a cross-section of 5 x 12 mm. Insulation end sections are available separately. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC output choke TEP3820-0CS41 17,5A
8C000100
GTIN: 4046548101072
PMC output choke TEP3820-0CS41 17,5A

Phase-out article

Output choke TEP3820-0CS41 from a cable lenght > 50m, maximum of 100m Technical data: Voltage range 3x <480 VAC. Frequency range 0-200 Hz. Nominal current 17,5 A @ 4kHz / 15,2 A @ 8kHz. Inductance 0,9 mH. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C3/005/6Q0/S1
8C000133
GTIN: 4046548101799
PMCcable M3/E1C3/005/6Q0/S1

Phase-out article

Power cable. cable assembled on both sides Crimp connectors <> con.40 round connector 8-pin. No. of wires and cross section (4 × 6,0 + (2 × 1,5) + (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ705. Length 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C5/2m5/1Q0/S1
8C000131
GTIN: 4046548101775
PMCcable M3/E1C5/2m5/1Q0/S1

Phase-out article

Power cable. Cable assembled on both sides Crimp connectors <> con.15 round connector 8-pin. No. of wires and cross section (4 × 1,0 + (2 × 0,5) + (2 × 0,34)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors EZ301 to EZ303. Length 2,5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M3/E1C5/005/1Q0/S1
8C000127
GTIN: 4046548101737
PMCcable M3/E1C5/005/1Q0/S1

Phase-out article

Power cable. Cable assembled on both sides Crimp connectors <> con.15 round connector 8-pin. No. of wires and cross section (4 × 1,0 + (2 × 0,5) + (2 × 0,34)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors EZ301 to EZ303. Length 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request

Save basket

Create a new order or get an individual offer

Select intended use