Compare 0
Vídeo tutorial
Portugal | português
Você tem agora of 6 produtos para comparar

Acessório PMC ProtegoD

Conexão e integração flexível e simples em praticamente qualquer ambiente de automação: cartões de ampliação para diversos sistemas de barramento de campo, cabos de conexão e resistências de frenagem para o PMCprotego D oferecem ajuda para isso.

Número do produto Descrição
8176261

Cable for PMCprotego and motor with terminal box Assembled on both sides with connector <> Ring cable shoe No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 5 m.

8176262

Cable for PMCprotego and motor with terminal box Assembled on both sides with connector <> Ring cable shoe No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 10 m.

8176263

Cable for PMCprotego and motor with terminal box Assembled on both sides with connector <> Ring cable shoe No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 15 m.

8176264

Cable for PMCprotego and motor with terminal box Assembled on both sides with connector <> Ring cable shoe No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 20 m.

8176268

Cable for PMCprotego and motor with connector design Assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 5 m.

8176269

Cable for PMCprotego and motor with connector design Assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 10 m.

8176270

Cable for PMCprotego and motor with connector design Assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 15 m.

8176271

Cable for PMCprotego and motor with connector design Assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 20 m.

8176278

Card can be used in PMCprotego Connector X5 (e.g. for Encoder emulation).

8176300

Fieldbus junction box for PMCprotego D (size 1.5 A to 24 A) Interfaces: CAN-in, CAN-out, RS232 with termination and monitoring voltage switch.

8176330

consisting of connector X9 and shielded terminal for devices up to 24 A.

8176372

suitable for the PMCprotego D/01-12A and PMCtendo DD4/01-20A Type: FZECQU 400 x 65-33 Performance at 40° C/100 % ED: 600 W Resistance value: 33 OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.

8176332

suitable for the PMCprotego D/24A Type: FZECQU 400x65-23 Performance at 40° C/100 % ED: 600 W Resistance value: 23 OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.

8176374

suitable for the PMCprotego D/01-12A and PMCtendo DD4/01-20A Type: FZZCQU 500 x 65-33 Performance at 40° C/100 % ED: 1600 W Resistance value: 33 OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.

8176334

suitable for the PMCprotego D/24A Type: FZZCQU 500 x 65-23 Performance at 40° C/100 % ED: 1600 W Resistance value: 23 OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.

8176108

Card can be used in PMCprotego Connector X5 (e.g. for Encoder emulation) Connector X3C (2 analogue inputs and 2 analogue outputs).

8176470

Fieldbus junction box for PMCprotego D (size 48 A and 72 A) Interfaces: CAN-in, CAN-out, RS232 with termination and monitoring voltage switch.

8176476

Cable for PMCprotego and motor with connector design assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 4.0 + (2 x 1,5)) Trailing, length: 20 m.

8176473

Cable for PMCprotego and motor with connector design assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 4.0 + (2 x 1,5)) Trailing, length: 5 m.

8176474

Cable for PMCprotego and motor with connector design assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 4 + (2 x 1,5)) Trailing, length: 10 m.

8176475

Cable for PMCprotego and motor with connector design assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 4 + (2 x 1,5)) Trailing, length: 15 m.

8177180

Power cable Cable assembled on both sides Connector <> round connector 8-pin M40 SpeedTec No. of wires and cross section 4 x 2.5 + 1 x (2 x 1.0) suitable for PMCprotego D.01-24 and the motors PMCtendo SZ. Length in accordance with customer specifications.

8177190

Power cable Cable assembled on both sides Connector <> round connector 8-pin M40 SpeedTec No. of wires and cross section 4 x 4.0 + 1 x (2 x 1.5) suitable for PMCprotego D.01-24 and the motors PMCtendo SZ. Length in accordance with customer specifications.

8177100

Feedback cable for EnDat 2.2 Cable assembled on both sides Sub-D15 connector <> round connector 12-pin SpeedTec suitable for all PMC servo controllers (DD5, protego) and the motors PMCtendo SZ. Length in accordance with customer specifications.

8177210

Power cable Cable assembled on both sides Crimp connector <> round connector 8-pin M40 SpeedTec No. of wires and cross section 4 x 6.0 + 1 x (2 x 1.5) suitable for PMCprotego D.48-72 and the motors PMCtendo SZ. Length in accordance with customer specifications.

Download

Aguardar um pouco enquanto os dados estão sendo carregados

Aguardar um pouco enquanto os dados estão sendo carregados