비교 0
비디오 튜토리얼
South Korea | 한국어
개의 제품을 비교

부속품 - PMC ProtegoD

거의 모든 자동화 환경에서 탄력적인 연결 및 통합을 간단히 수행할 수 있습니다. 다양한 필드버스 시스템용 확장 카드, 연결 케이블 및 PMCprotego D용 브레이크 저항기가 여기에 도움이 될 것입니다.

제품 번호 설명
8176261

Cable for PMCprotego and motor with terminal box Assembled on both sides with connector <> Ring cable shoe No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 5 m.

8176262

Cable for PMCprotego and motor with terminal box Assembled on both sides with connector <> Ring cable shoe No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 10 m.

8176263

Cable for PMCprotego and motor with terminal box Assembled on both sides with connector <> Ring cable shoe No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 15 m.

8176264

Cable for PMCprotego and motor with terminal box Assembled on both sides with connector <> Ring cable shoe No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 20 m.

8176268

Cable for PMCprotego and motor with connector design Assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 5 m.

8176269

Cable for PMCprotego and motor with connector design Assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 10 m.

8176270

Cable for PMCprotego and motor with connector design Assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 15 m.

8176271

Cable for PMCprotego and motor with connector design Assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 20 m.

8176278

Card can be used in PMCprotego Connector X5 (e.g. for Encoder emulation).

8176300

Fieldbus junction box for PMCprotego D (size 1.5 A to 24 A) Interfaces: CAN-in, CAN-out, RS232 with termination and monitoring voltage switch.

8176330

consisting of connector X9 and shielded terminal for devices up to 24 A.

8176372

suitable for the PMCprotego D/01-12A and PMCtendo DD4/01-20A Type: FZECQU 400 x 65-33 Performance at 40° C/100 % ED: 600 W Resistance value: 33 OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.

8176332

suitable for the PMCprotego D/24A Type: FZECQU 400x65-23 Performance at 40° C/100 % ED: 600 W Resistance value: 23 OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.

8176374

suitable for the PMCprotego D/01-12A and PMCtendo DD4/01-20A Type: FZZCQU 500 x 65-33 Performance at 40° C/100 % ED: 1600 W Resistance value: 33 OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.

8176334

suitable for the PMCprotego D/24A Type: FZZCQU 500 x 65-23 Performance at 40° C/100 % ED: 1600 W Resistance value: 23 OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.

8176108

Card can be used in PMCprotego Connector X5 (e.g. for Encoder emulation) Connector X3C (2 analogue inputs and 2 analogue outputs).

8176470

Fieldbus junction box for PMCprotego D (size 48 A and 72 A) Interfaces: CAN-in, CAN-out, RS232 with termination and monitoring voltage switch.

8176476

Cable for PMCprotego and motor with connector design assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 4.0 + (2 x 1,5)) Trailing, length: 20 m.

8176473

Cable for PMCprotego and motor with connector design assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 4.0 + (2 x 1,5)) Trailing, length: 5 m.

8176474

Cable for PMCprotego and motor with connector design assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 4 + (2 x 1,5)) Trailing, length: 10 m.

8176475

Cable for PMCprotego and motor with connector design assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 4 + (2 x 1,5)) Trailing, length: 15 m.

8177180

Power cable Cable assembled on both sides Connector <> round connector 8-pin M40 SpeedTec No. of wires and cross section 4 x 2.5 + 1 x (2 x 1.0) suitable for PMCprotego D.01-24 and the motors PMCtendo SZ. Length in accordance with customer specifications.

8177190

Power cable Cable assembled on both sides Connector <> round connector 8-pin M40 SpeedTec No. of wires and cross section 4 x 4.0 + 1 x (2 x 1.5) suitable for PMCprotego D.01-24 and the motors PMCtendo SZ. Length in accordance with customer specifications.

8177100

Feedback cable for EnDat 2.2 Cable assembled on both sides Sub-D15 connector <> round connector 12-pin SpeedTec suitable for all PMC servo controllers (DD5, protego) and the motors PMCtendo SZ. Length in accordance with customer specifications.

8177210

Power cable Cable assembled on both sides Crimp connector <> round connector 8-pin M40 SpeedTec No. of wires and cross section 4 x 6.0 + 1 x (2 x 1.5) suitable for PMCprotego D.48-72 and the motors PMCtendo SZ. Length in accordance with customer specifications.

다운로드

데이터를 로드하는 동안 대기하십시오.

데이터를 로드하는 동안 대기하십시오.