比較 0
日本 | 日本語
6製品中 製品が比較リストに入っています

PMCtendo DDサーボアンプのアクセサリ - 技術データ

サーボアンプPMCtendo DDのアクセサリには、各種ケーブル、モータチョーク、メインフィルタ、ブレーキ抵抗が含まれています。

製品コード 型式
0802872

Cable assembled on both sides DD4 connector <> round connector 8-pin No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing capability Length in accordance with customer specifications.

0802932

Cable assembled on both sides Sub-D15 connector <> round connector 12-pin suitable for all PMC servo controllers (DD4, DD5, protego) Length in accordance with customer specifications.

0803090

Cable assembled on both sides DD4 connector <> round connector 8-pin No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 10 m.

0803091

Cable assembled on both sides Sub-D15 connector <> round connector 12-pin suitable for all PMC servo controllers (DD4, DD5, protego) Length: 10 m.

0803139

Cable assembled on both sides DD4 connector <> round connector 8-pin No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 15 m.

0803140

Cable assembled on both sides Sub-D15 connector <> round connector 12-pin suitable for all PMC servo controllers (DD4, DD5, protego) Length: 15 m.

0803141

Cable assembled on both sides DD4 connector <> round connector 8-pin No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 20 m.

0803142

Cable assembled on both sides Sub-D15 connector <> round connector 12-pin suitable for all PMC servo controllers (DD4, DD5, protego) Length: 20 m.

0803148

Cable assembled on both sides Sub-D15 connector <> round connector 12-pin suitable for all PMC servo controllers (DD4, DD5, protego) Length: 8 m.

0803149

Cable assembled on both sides DD4 connector <> round connector 8-pin No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 8 m.

1106100

consisting of: Connector X3, X4, X7, X8 Connector 0A, 0B.

4105424

Connector kit "X9", for device sizes up to 20 A.

4105531

Expansion card with 14 inputs and 8 outputs can be used in PMCtendo DD4 & PMCtendo DD5 & PMCprotego.

4105774

Output filter between servo controller and motor Rated current: 4 A.

4105777

Output filter between servo controller and motor Rated current: 10 A.

4105779

Expansion card PROFIBUS-DP slave 187.5 KBaud - 12 Mbaud, only for PMCtendo-DD4 Note: Operating the PROFIBUS card is not possible with controller firmware version 5.16.

8163583

Use in PMCtendo DD4 and DD5 Interfaces: CAN-in, CAN-out, RS232 with termination and monitoring voltage switch.

8165834

Cable assembled on both sides Sub-D9 connector <> round connector 12-pin Trailing capability suitable for all PMC servo controllers (DD4, DD5, protego) Length: 10 m.

8165878

Cable assembled on both sides Sub-D9 connector <> round connector 12-pin Trailing capability suitable for all PMC servo controllers (DD4, DD5, protego) Length: 5 m.

8165879

Cable assembled on both sides Sub-D15 connector <> round connector 12-pin suitable for all PMC servo controllers (DD4, DD5, protego) Length: 5 m.

8165880

Cable assembled on both sides DD4 connector <> Ring cable shoe for terminal box No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 5 m.

8165881

Cable assembled on both sides DD4 connector <> Ring cable shoe for terminal box No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 10 m.

8165882

Cable assembled on both sides DD4 connector <> round connector 8-pin No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 5 m.

8165883

Cable assembled on both sides Sub-D9 connector <> round connector 12-pin Trailing, length: 15 m suitable for all PMC servo controllers (DD4, DD5, protego).

8166771

Rated current: 42 A Typ. power dissipation: 15 W Protection class: IP20 Connection type: Terminals.

ダウンロード

しばらくお待ちください。データをダウンロード中です。

しばらくお待ちください。データをダウンロード中です。