Connection cable for CAN rotary encoder with bus termination Connector and voltage feed (max. 30 V DC).

Absolute encode AG612/661/626 and CEV58S > PMCprimo. Cable assembled on both sides connector Sub-D9 <> round connector 21-pin For all devices PMCprimo with SSI encoder connection via D-Sub connector Trailing, length: 10 m.

Model: Puls Mini Line Input: 100 - 240 V AC, Output: 5 V DC/5 A for installation on a DIN rail.

Fieldbus junction box for PMCprimo DriveP (size 1.5 A to 24 A) Interfaces: CANbus, RS 232 and PROFIBUS with termination switch and RJ45 cable to connect the fieldbus junction box to the PMCprimo C.

Fieldbus junction box for PMCprimo DriveP (size 1.5 A to 24 A) Interfaces: CAN1, RS232 and CAN2 with termination switch and RJ45 cable to connect the fieldbus junction box to the PMCprimo C.

Fieldbus junction box for PMCprimo DriveP (size 48 A and 72 A) Interfaces: CAN1, RS 232 and CAN2 with termination switch and RJ45 cable to connect the fieldbus junction box to the PMCprimo C.

Fieldbus junction box for PMCprimo DriveP (size 48 A and 72 A) Interfaces: CANbus, RS 232 and PROFIBUS with termination switch and RJ45 cable to connect the fieldbus junction box to the PMCprimo C.

suitable for the device series PMCprimo MC consisting of: X40a, X40b and X50a, X50b, X50c

Model: Puls Mini Line Input: 100 - 240 V AC, Output: 12 V DC/2.5 A for installation on a DIN rail.

Model: Puls Mini Line Input: 100 - 240 V AC, Output: 24 V DC/4.2 A for installation on a DIN rail.

Cable assembled on both sides, Connector Sub-D9 male <> connector Sub-D9 female CAN network, length: 0.7 m.

Cable assembled on both sides, Connector Sub-D9 male <> connector Sub-D9 female CAN network, length: 0.25 m.

Can be used for SSI and incremental encoder Assembled on both sides, connector male/connector female Sub-D9.

Connection cable serial interface X6 <> PC on both sides with Sub-D9 (2x socket).

Round connector, canbe shielded, with sockets for soldering.

Software key for enabling the software option "Software-SPS" in the PMCprimo hardware. Affix the licence label supplied to the PMCprimo device as a proof of purchase!.

Software Option Ethernet, integral in the PMCprimo device.

Memory card with at least 64 MB; suitable for PMCprimo 16+ and PMCprimo Drive2/3 with built-in expansion card.

Programming cable Ethernet, length: 5 m.

Cable assembled on both sides, Connector RJ45 <> connector Sub-D9 PMCprimo-mcDrive2 adapter of X11/3 to Modbus or PROFIBUS. Length: 0.45 m.