United States | english

CMSE® - Certified Machinery Safety Expert

Objective

The aim of the CMSE® training is to deal with the complex technical issues surrounding machinery safety and enable an understanding of the lifecycle - from legislation, standards and safeguarding techniques to a detailed review of functional safety areas.  This is a four day training, delivered in the form of five individual modules containing lectures, discussions, and practical workshops.  The final day culminates in an open book examination to verify understanding with the potential for certification as a Machinery Safety Expert.

Agenda/Contents

  • US and European Regulations and Standards in relation to machinery
  • How these may be applied to the design, build, maintenance and operation of machinery used within the European Economic Area
  • Obligations to be met when specifying, designing, constructing or putting a machine into service
  • CMSE certification will be issued by TUV Nord upon successful completion of a written examination at the end of the course

Target group

If you are involved in the operation, maintenance, supervision or import of machinery, CMSE ® is certification which will offer proof of your competence - globally!

Prerequisite

The following are the minimum criteria which candidates must satisfy in order to meet the eligibility criteria. One (either or) of the criteria below must be met in order to be eligible to proceed with the training:

  • 5+ Years Experience in Safety - Long term professional experience and training in one or several areas relating to machinery safety e.g. technology, safety-related design and construction, safety-related maintenance and repair (5+ years).
  • Qualification AND 1+ Year Experience - Formal qualification(s) in the areas of General science, Engineering, Technology, Construction and Design, or Maintenance and Repair of Machinery from a University / Technical college where the training lasted two or more years. AND...At least one year practical experience in one or several areas relating to machinery safety, e.g. technology, safety-related design and construction, safety-related maintenance and repair.

Take a test drive

Why not test your knowledge now – with 10 questions from the CMSE® quiz!  The quiz will provide an initial assessment of your knowledge, since the questions are similar in content and scope to the official examination. Good luck!


CMSE® quiz

Ready to register?

Sold on all the benifits CMSE can offer you?  Great!  The next step is to fill out the application.  You'll find that here: www.cmse.com/en-US/application/application-form

See you in class!

Minneapolis, MN

Order numbers
Duration Four Days
Start: Day 1, 8:00 AM
End: Day 4, 4:30 PM
Maximum number of delegates 6-15
Price $2,650.00
Further informations An application must be filled out first, please see www.cmse.com/en-US/application/application-form

Location: Hyatt Place Minneapolis Airport - South, 7800 International Drive, Bloomington, MN 55425 - (www.minneapolisairport.place.hyatt.com) Mention this Pilz training program to get a discounted rate.
Dates and Application

Orlando, FL

Order numbers CMSE
Duration Four Days
Start: Day 1, 8:00 AM
End: Day 4, 4:30 PM
Maximum number of delegates 6-15
Price $2,650.00
Further informations An application must be filled out first, please see www.cmse.com/en-US/application/application-form

Class will be held at the Fairfield Inn & Suites Orlando, International Drive Convention Center, 8214 Universal Blvd., Orlando, FL 32819. When booking a room, please ask for the "Pilz" rate.
Dates and Application
Dec 12, 2018 - Dec 15, 2018
Dec 11, 2019 - Dec 14, 2019

Canton, Michigan

Order numbers CMSE
Duration Four Days
Start: Day 1, 8:00 AM
End: Day 4, 4:30 PM
Maximum number of delegates 6-15
Price $2,650.00
Further informations An application must be filled out first, please see www.cmse.com/en-US/application/application-form

Location: Pilz USA Headquarters, 7150 Commerce Blvd., Canton, MI 48187
Dates and Application
Nov 14, 2018 - Nov 17, 2018
Feb 13, 2019 - Feb 16, 2019
May 15, 2019 - May 18, 2019
Aug 14, 2019 - Aug 17, 2019
Nov 13, 2019 - Nov 16, 2019

Dallas, TX

Order numbers CMSE
Duration Four Days
Start: Day 1, 8:00 AM
End: Day 4, 4:30 PM
Maximum number of delegates 6-15
Price $2,650.00
Further informations An application must be filled out first, please see www.cmse.com/en-US/application/application-form

Location: Pilz Dallas Training office, 15770 N. Dallas Parkway, Suite 102, Dallas, TX 75248
Dates and Application
Sep 18, 2019 - Sep 21, 2019

Charlotte, NC

Order numbers
Duration 4 Days
Start: Day 1, 8:00 AM
End: Day 4, 4:30 PM
Maximum number of delegates 6-15
Price $2,650.00
Further informations An application must be filled out first, please see www.cmse.com/en-US/application/application-form
Dates and Application
Apr 24, 2019 - Apr 27, 2019

San Diego, CA

Order numbers
Duration 4 Days
Start: Day 1, 8:00 AM
End: Day 4, 4:30 PM
Maximum number of delegates 6-15
Price $2,650.00
Further informations An application must be filled out first, please see www.cmse.com/en-US/application/application-form
Dates and Application
Jun 12, 2019 - Jun 15, 2019
Contact

Pilz Automation Safety L.P.
7150 Commerce Boulevard
Canton, MI 48187
USA

Telephone: +1 734 354-0272
E-Mail: info@pilzusa.com

Technical Support

Telephone: +1 877-PILZUSA (745-9872)
E-Mail: support@pilzusa.com