United States | english

Terminating resistor

On network topologies constructed with coaxial cable (e.g. in accordance with 10Base2), the start and end of each segment must be terminated with a resistor. The value of the terminating resistor must correspond to the cable impedance. On 10Base2, this is 50 Ohms.

 

Contact

Pilz Automation Safety L.P.
7150 Commerce Boulevard Canton
Michigan 48187
USA

Telephone: +1 734 354-0272
E-Mail: info@pilzusa.com

Technical Support

Telephone: +1 877-PILZUSA (745-9872)
E-Mail: support@pilzusa.com