text.skipToContent text.skipToNavigation
Close 

You are on the Pilz international website



Please select a language or switch to a country
Choose your country to get national content
  1. Home
  2. Drive technology
  3. Servo amplifier
  4. PMC SC6, PMC SI6 - servo drives
  • 1(current)
  • 2
  • 3
95 Products found
PMC SC6A062 terminal set (R)
8C000061
GTIN: 4046548100815
PMC SC6A062 terminal set (R)

Phase-out article

Terminal set for drive controllers SC6A062R with STO using terminals Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC SC6A062 terminal set (Z/U/Y/X)
8C000062
GTIN: 4046548100822
PMC SC6A062 terminal set (Z/U/Y/X)

Phase-out article

Terminal set for drive controllers SC6A062Z, SC6A062U, SC6A062Y, SC6A062X Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC SI6A262 terminal set (R)
8C000045
GTIN: 4046548100655
PMC SI6A262 terminal set (R)

Phase-out article

Terminal set for drive controllers SI6A262R with STO using terminals Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC SI6A262 terminal set (Z/U/Y/X)
8C000046
GTIN: 4046548100662
PMC SI6A262 terminal set (Z/U/Y/X)

Phase-out article

Terminal set for drive controllers SI6A262Z, SI6A262U, SI6A262Y, SI6A262X Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC SI6A361 terminal set (R)
8C000053
GTIN: 4046548100730
PMC SI6A361 terminal set (R)

Phase-out article

Terminal set for drive controllers SI6A361R with STO using terminals Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC SI6A261 terminal set (Z/U/Y/X)
8C000038
GTIN: 4046548100389
PMC SI6A261 terminal set (Z/U/Y/X)

Phase-out article

Terminal set for drive controllers SI6A261Z, SI6A261U, SI6A261Y, SI6A261X Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC SC6A162 terminal set (Z/U/Y/X)
8C000070
GTIN: 4046548100907
PMC SC6A162 terminal set (Z/U/Y/X)

Phase-out article

Terminal set for drive controllers SC6A162Z, SC6A162U, SC6A162Y, SC6A162X Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC SC6A162 terminal set (R)
8C000069
GTIN: 4046548100891
PMC SC6A162 terminal set (R)

Phase-out article

Terminal set for drive controllers SC6A162R with STO using terminals Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC SC6A261 terminal set (R)
8C000077
GTIN: 4046548100563
PMC SC6A261 terminal set (R)

Phase-out article

Terminal set for drive controllers SC6A261R with STO using terminals Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC SC6A261 terminal set (Z/U/Y/X)
8C000078
GTIN: 4046548100570
PMC SC6A261 terminal set (Z/U/Y/X)

Phase-out article

Terminal set for drive controllers SC6A261Z, SC6A261U, SC6A261Y, SC6A261X Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/005/1Q5/S1
8C000175
GTIN: 4046548105445
PMCcable M4/E1C6/005/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/010/1Q5/S1
8C000176
GTIN: 4046548106381
PMCcable M4/E1C6/010/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/015/1Q5/S1
8C000177
GTIN: 4046548106398
PMCcable M4/E1C6/015/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 15 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/018/1Q5/S1
8C000178
GTIN: 4046548106503
PMCcable M4/E1C6/018/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 18 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/020/1Q5/S1
8C000179
GTIN: 4046548106510
PMCcable M4/E1C6/020/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 20 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/025/1Q5/S1
8C000180
GTIN: 4046548106527
PMCcable M4/E1C6/025/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 25 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/2M5/1Q5/S1
8C000181
GTIN: 4046548106534
PMCcable M4/E1C6/2M5/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 2,5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/7M5/1Q5/S1
8C000182
GTIN: 4046548106541
PMCcable M4/E1C6/7M5/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 7,5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/12M5/1Q5/S1
8C000183
GTIN: 4046548106558
PMCcable M4/E1C6/12M5/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 12,5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC PS6A44 terminal set
8C000185
GTIN: 4046548109658
PMC PS6A44 terminal set

Phase-out article

Terminal set for supply module PMC PS6A44 Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
  • 1(current)
  • 2
  • 3

Save basket

Create a new order or get an individual offer

Select intended use