On network topologies constructed with coaxial cable (e.g. in accordance with 10Base2), the start and end of each segment must be terminated with a resistor. The value of the terminating resistor must correspond to the cable impedance. On 10Base2, this is 50 Ohms.
Pilz Slovakia s.r.o.
Ludvíka Svobodu 2674/1
058 01 Poprad
Slovakia
Telephone: +421 52 772 8201
E-Mail: info@pilz.sk
Telephone: +421 911 954 200
E-Mail: info@pilz.sk