Functional safety

What does functional safety mean?

Labyrinth of standards

The causes of hazards and the technical measures applied to avoid them can vary widely. As a result, different types of safety are differentiated by the cause of potential hazards, for example.

"Functional safety" is the term used when safety depends on the correct function of a control system.

The risk assessment plays a key role with regard to functional safety requirements. The steps you need to consider when assessing and reducing risk on machinery come from the standard EN ISO 12100. The evaluation and verification of safety functions are the prevail of the standards EN ISO 13849 and EN / IEC 62061, provided the required safeguarding is dependent on a control system. The safety integrity requirements (PL, SIL) are derived from the risk estimation.

Functional safety standards - EN ISO 13849 and IEC 62061

Functional safety describes the part of a system’s safety that depends on the correct function of the safety-related control system. Safety generally depends also on other risk-reducing measures, which are considered in accordance with EN ISO 12100. E-STOPs, safety gates, light curtains or speed monitoring are just some of the typical safety devices used to safeguard plant and machinery. The rising level of complexity of plant and machinery means that programmable control systems are increasingly being used alongside conventional relays. Both EN ISO 13849 and IEC 62061 ensure compliance with international legislation, e.g. the Machinery Directive. Both standards are paramount for plant and machine builders, because many B and C standards refer to them directly.

Revision of the standards EN ISO 13849 and IEC 62061

Both standards need to be updated to continue to represent the "state of the art". The latest edition of IEC 62061 was published on 19 February 2021. The impetus to revise both standards stemmed not just from the routine revision and upgrade to the state of the art, but also from the many discussions that took place during the failed attempt to unify the two standards within IEC/ISO 17305.

The content of IEC 62061 is known, but the changes to EN ISO 13849 are not yet finalised; however, it is clear that both new editions:

  • Require a clear description of the safety requirements specifications, including information such as
    • The operating modes during which the function is active (always, only during maintenance, etc.)
    • How to monitor safety functions
    • When and how to test the safety function
    • The associated fault reaction
    • Reaction times
  • Changed their methodology on how to define the required safety level (PL or SIL)
  • Changed requirements with respect to the application software, in line with the complexity and programming language selected
  • Allow subsystems that were developed in accordance with one standard to be used within the other


Existing safety concepts must be closely scrutinised

Plant and machine builders should re-assess existing safety concepts with regard to the changed risk classification in the standards. In some cases there will be greater flexibility with regard to the proposed risk parameters. Whether there are any effects on existing safety assessments must be tested on a case-by-case basis.

Transition periods after ratification?

IEC 62061 was published in February 2021; however, due to ongoing discussions in the standards committees, it might be 2022 for EN ISO 13849. It is far from clear whether there will be a transition period for publication of the standards in the Official Journal and if so, how long this might be. For this reason, it is advisable to deal with the expected development early, in other words now.
We’ll keep our eye on the ball for you!

Standard IEC 62061

Functional safety at a glance

Consultation on functional safety

The aim of functional safety is always to protect humans and machines from hazards. In Europe, the relevant functional safety standards in the engineering sector are listed in the Machinery Directive. Download our "Functional safety" poster now and discover at a glance the procedure for risk assessment and risk reduction in accordance with EN ISO 12100. You can draw on two important standards, derived from this A-standard:

  • EN ISO 13849-1: Applicable for electrical, electronic, programmable electronic, hydraulic, pneumatic, mechanical systems
  • EN / IEC 62061: Applicable for electrical, electronic, programmable electronic systems

Important parameters for the reliability of safety-related functions are the safety integrity level (SIL) and performance level (PL).

Download functional safety poster

 

Further information:

Further information

Services - As a solution supplier, Pilz provides support across the machine lifecycle

Training - Stay up-to-date on machinery safety and automation

Read more in the Safety Compendium

Overview of area

Contact

Pilz South East Asia Pte. Ltd.
25 International Business Park, #04-56 German Centre
Singapore 609916
Singapore

Telephone: +65 6839 292-0
E-Mail: sales@pilz.sg

Technical Support

Telephone: +65 6829 2920
E-Mail: techsupport-sg@pilz.com