The motor is allowed to travel a permitted distance following a start command. A safe stop function must be triggered once the limit value is reached. If the permitted distance is exceeded, this must be detected and the drive must be safely brought to a standstill. Encoder systems with relative measurement are sufficient for this safety function.
Safely Limited Increment (SLI)
Contact
Pilz Skandinavien K/S, dansk Filial
Smörhålevägen 3
434 42 Kungsbacka
Sweden
Telephone: +46 300 13990
E-Mail: pilz.se@pilz.dk
Technical Support
Telephone: +46 300 13990 / +45 74436332
E-Mail: support.se@pilz.dk
Was this article helpful?