630822
GTIN: 4046548077087
Sensor individual muting arm for basic light guard PSEN opXX-xx-xxx/1,
active.
On request
Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
630824
GTIN: 4046548077100
Mounting set for fixing two muting arms to a basis
light guard of the PSEN opXX-xx-xxx/1 series.
On request
630820
GTIN: 4046548077063
Sensing device L-muting arm with passive reflector unit and matching
bracket on the basis light guard PSEN opXX-xx-xxx/1.
On request
631061
GTIN: 4046548077131
Mounting kit for installation without dead zones of two Advanced lightguards
over the corner.
On request
631070
GTIN: 4046548077117
Programming adapter for the PSEN opXX-A series. Using the PC Software
all the functions (muting, blanking, cascading) of the
light guards of the Advanced series can be set. The dongle can
also be used to save configurations in the light guard
and to transfer it to other light guards. 3x M12 connector adapter: 12-
pin, muting: 5-pin, connection configuration: 4-pin Ethernet. Connection
cables are not supplied with the device.
On request
630823
GTIN: 4046548077094
Sensor individual muting arm for basic light guard PSEN opXX-xx-xxx/1,
passive.
On request
583216
GTIN: 4046548084467
PSENvip AS2 E
Phase-out article
Adjustment plate with accessory for sender PSENvip E.
Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.
On request
583215
GTIN: 4046548084450
PSENvip AS2 R
Phase-out article
Adjustment plate with accessory for receiver PSENvip R.
Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.
On request
532108
GTIN: 4046548085112
Assembly aid, for PSENcode, can be used as a mechanical stop for
swing gates, PU = 2 pieces, 1 part for switch plus 1
part for actuator.
On request
631182
GTIN: 4046548086409
Mounting kit for light guards of the series PSENopt SL in O form.
Lateral attachment to the profile. PU = 4 mounting brackets
On request
631180
GTIN: 4046548086287
Mounting kit for light guards of the series PSENopt SL in C form.
Lateral attachment to the profile. PU = 2 mounting brackets
On request
631181
GTIN: 4046548086294
Mounting kit for light guards of the series PSENopt SL in L form.
Lateral attachment to the profile. PU = 2 mounting brackets
On request
583207
GTIN: 4046548078763
PSENvip AT spring mount
Phase-out article
Adjustment templates to position between the upper and lower tool. To
align PSENvip during installation and tool change. PL e SIL
3. Approved in accordance with IEC 61496-1 and EN 12622.
Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.
On request
534311
GTIN: 4046548080506
Distance plate for PSEN ma1.4, VP = 10 piece, 5 pieces (534321) for
actuator and 5 pieces (534310) for switch.
On request
632016
GTIN: 4046548080834
Expanded mounting kit with 3 degrees of freedom for fixing the
light guard series PSEN optII, 2-parts.
On request
632017
GTIN: 4046548080841
Expanded mounting kit with 3 degrees of freedom for fixing the
light guard series PSEN optII, 3-parts.
On request
632014
GTIN: 4046548080803
Laser alignment aid for light guard series PSEN opt II.
On request
540308
GTIN: 4046548081251
One-way screws, one-way slot, M4x10, material stainless steel, PU = 10
pieces, suitable for actuator: PSEN cs1.1, PSEN cs2.1, PSEN cs2.2.
On request
540309
GTIN: 4046548081268
One-way screws, one-way slot, M4x12, material stainless steel, PU = 10
pieces, suitable for actuator: PSEN cs1.1, PSEN cs2.1, PSEN cs2.2.
On request
583211
GTIN: 4046548081381
PSENvip AP2
Phase-out article
Set of mounting plates for transmitter PSENvip E and receiver PSENvip R.
Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.
On request
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer