text.skipToContent text.skipToNavigation
Close 

You are on the Pilz international website



Please select a language or switch to a country
Choose your country to get national content
  1. Home
  2. Sensor technology
956 Products found
PSEN cs3.19-OSSD2 1actuator
541383
GTIN: 4046548070781
PSEN cs3.19-OSSD2 1actuator
RFiD actuator for safety switch PSEN cs3.19, IP67, PU = 1 piece, OSSD2.

PSEN cs3.19-OSSD1&2 1actuator
541380
GTIN: 4046548070767
PSEN cs3.19-OSSD1&2 1actuator
RFiD actuator for safety switch PSEN cs3.19, IP67, PU = 1 piece, OSSD 1&2.

PSEN cs3.19-OSSD1 1actuator
541382
GTIN: 4046548070774
PSEN cs3.19-OSSD1 1actuator
RFiD actuator for safety switch PSEN cs3.19, IP67, PU = 1 piece, OSSD1.

PSEN cs3.19n/PSEN cs3.19 1sw+OSSD1+OSSD2
541305
GTIN: 4046548071030
PSEN cs3.19n/PSEN cs3.19 1sw+OSSD1+OSSD2
RFiD safety switch, 2 safe SC outputs, 5-pin M12 male connector, one actuation direction, IP67, typ. operating distance 11 mm, Sao = 8mm, Sar = 20 mm, PU = 1 piece coded switch with two actuators (OSSD1, OSSD2).

PSEN cs3.19n/PSEN cs3.19 1sw+OSSD1&2
541304
GTIN: 4046548071023
PSEN cs3.19n/PSEN cs3.19 1sw+OSSD1&2
RFiD safety switch, 2 safe SC outputs, 5-pin M12 male connector, one actuation direction, IP67, typ. operating distance 11 mm, Sao = 8mm, Sar = 20 mm, PU = 1 piece coded switch with actuator (OSSD1&2).

PSEN cs1.19n/PSEN cs1.19 1sw+OSSD1+OSSD2
540305
GTIN: 4046548071016
PSEN cs1.19n/PSEN cs1.19 1sw+OSSD1+OSSD2
RFiD safety switch, 2 safe SC outputs, 5-pin M12 male connector, 4 actuation directions, IP67, typ. operating distance 21 mm, Sao = 15 mm,Sar = 40 mm, PU = 1 piece coded switch with two actuators (OSSD1, OSSD2).

PSEN cs1.19n/PSEN cs1.19 1sw+OSSD1&2
540304
GTIN: 4046548071009
PSEN cs1.19n/PSEN cs1.19 1sw+OSSD1&2
RFiD safety switch, 2 safe SC outputs, 5-pin M12 male connector, 4 actuation directions, IP67, typ. operating distance 21 mm, Sao = 15 mm,Sar = 40 mm, PU = 1 piece coded switch with one actuator (OSSD1&2).

PSEN cs3.1b /PSEN cs3.1 1unit
541012
GTIN: 4046548073805
PSEN cs3.1b /PSEN cs3.1 1unit
RFiD safety switch 2 safe SC outputs, connection cable 10 m, one actuation direction, support for SDD, IP6K9K, switching distance 11 mm, Sao = 8 mm, Sar = 20 mm, PU = 1 piece coded switch with actuator.

PSEN enc s2 eCAM
544012
GTIN: 4046548074277
PSEN enc s2 eCAM
Absolute encoder, single-turn, with two redundant SSI interfaces, solid shaft 10 mm, feather key.

PSEN ma1.3b-29/PSEN ma1.3-08/8mm/1 unit
506219
GTIN: 4046548075007
PSEN ma1.3b-29/PSEN ma1.3-08/8mm/1 unit
Magnetic safety switch 3 n/o, round M12 design, IP65, LED, operating distance 8 mm, PU = 1 piece with M12 actuator, with 10 m cable (PUR).

PSEN op2H-A-30-075/1
631043
GTIN: 4046548075588
PSEN op2H-A-30-075/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 750 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

PSEN op2H-A-30-105/1
631045
GTIN: 4046548075601
PSEN op2H-A-30-105/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 1050 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

PSEN op2H-A-30-060/1
631042
GTIN: 4046548075571
PSEN op2H-A-30-060/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 600 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

PSEN op2H-A-30-045/1
631041
GTIN: 4046548075564
PSEN op2H-A-30-045/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 450 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

PSEN op2H-A-30-030/1
631040
GTIN: 4046548075557
PSEN op2H-A-30-030/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 300 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

PSEN op4F-A-14-120/1
631006
GTIN: 4046548075717
PSEN op4F-A-14-120/1
Safety light guard, Type 4, PL e, finger protection (resolution 14 mm), protected field height 1200 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

PSEN op2H-A-30-150/1
631048
GTIN: 4046548075632
PSEN op2H-A-30-150/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 1500 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

PSEN op4F-A-14-105/1
631005
GTIN: 4046548075700
PSEN op4F-A-14-105/1
Safety light guard, Type 4, PL e, finger protection (resolution 14 mm), protected field height 1050 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

PSEN op2H-A-30-165/1
631049
GTIN: 4046548075649
PSEN op2H-A-30-165/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 1650 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

PSEN op4H-A-30-135/1
631027
GTIN: 4046548075823
PSEN op4H-A-30-135/1
Safety light guard, Type 4, PL e hand protection (resolution 30 mm), protected field height 1350 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

Save basket

Create a new order or get an individual offer

Select intended use