Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
5 PMMA Altuglas plates of 30 cm length with the corresponding
mounting brackets to protect the front screen of a
safety ...
5 PMMA Altuglas plates of 180 cm in length with the corresponding
mounting brackets to protect the front screen of a
saf ...
Mounting kit with 4 mounting profiles for fixing a
safety light guard of the series "PSEN op.../1" for light guard lengt ...
Mounting kit with 4 mounting profiles for fixing a deviating mirror
of the series "PSEN op Mirror .../1" into the matchi ...
5 PMMA Altuglas plates of 120 cm in length with the corresponding
mounting brackets to protect the front screen of a
saf ...
5 PMMA Altuglas plates of 90 cm in length with the corresponding
mounting brackets to protect the front screen of a
safe ...
Installation bracket for the "PSEN op Mirror" series for directinstallation.
Deviating mirror 80 mm wide, with at length of 120 cm. For use with all
light guards of the PSENopt range < 120 cm. For ...
Deviating mirror 80 mm wide, with at length of 190 cm. For use with all
light guards of the PSENopt range < 190 cm. For ...
5 PMMA Altuglas plates of 50 cm in length with the corresponding
mounting brackets to protect the front screen of a
safe ...
5 PMMA Altu glass plates of 45 cm length with relevant mounting
brackets for protection of the front screen of a safety ...
PMMA acrylic tube for sealing and protecting a
safety light guard with a length of 120 cm of the series "PSEN op.../1".T ...
PMMA acrylic tube for sealing and protecting a
safety light guard with a length of 135 cm of the series "PSEN op.../1".T ...
Deviating mirror 80 mm wide, with at length of 165 cm. For use with all
light guards of the PSENopt range < 165 cm. For ...
Sensor T-muting arm with passive reflector unit and matching
bracket on the basis light guard PSEN opXX-xx-xxx/1.
Sensor individual muting arm for basic light guard PSEN opXX-xx-xxx/1,
active.
Mounting set for fixing two muting arms to a basis
light guard of the PSEN opXX-xx-xxx/1 series.
Sensing device L-muting arm with passive reflector unit and matching
bracket on the basis light guard PSEN opXX-xx-xxx/1 ...
Mounting kit for installation without dead zones of two Advanced lightguards
over the corner.
Programming adapter for the PSEN opXX-A series. Using the PC Software
all the functions (muting, blanking, cascading) of ...
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer