The motor is allowed to travel a permitted distance following a start command. A safe stop function must be triggered once the limit value is reached. If the permitted distance is exceeded, this must be detected and the drive must be safely brought to a standstill. Encoder systems with relative measurement are sufficient for this safety function.
Safely Limited Increment (SLI)
Pilz Netherlands
Pilz Netherlands Industrial Automation
Havenweg 22
4131 NM Vianen
Netherlands
Telephone: +31 347 320477
E-Mail: info@pilz.nl
Technical support
Telephone: +31347320477
E-Mail: ts@pilz.nl
Was this article helpful?