On network topologies constructed with coaxial cable (e.g. in accordance with 10Base2), the start and end of each segment must be terminated with a resistor. The value of the terminating resistor must correspond to the cable impedance. On 10Base2, this is 50 Ohms.
Pilz ltalia S.r.l. Safe Automation
Via Trieste, snc
20821 Meda (MB)
Italy
Telephone: +39 0362 1826711
E-Mail: info@pilz.it
Telephone: +39 0362 1826711
E-Mail: techsupport@pilz.it