Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
PITestop, E-STOP/contact block incl. surface mount housing, setconsisting of:
E-STOP pushbutton with contact block, 2 N/ ...
On request
PITestop, E-STOP/contact block set, consisting of E-STOP pushbutton with
contact block, 2 N/C, 1 N/O terminals (screw ty ...
On request
PITestop, E-STOP/contact block set, consisting of E-STOP pushbutton with
contact block, 2 N/C terminals (screw type).
On request
PITjog manually operated control device 3 built-in pushbuttons,
connection via 10-pin coiled cable with open end.
On request
PITestop, E-STOP/contact block incl. surface mount housing, setconsisting of:
E-STOP pushbutton with contact block, 2 N/ ...
On request
PITestop, E-STOP pushbutton IP65, with protective collar, with
key-release, without Pilz inscription on the actuator,
in ...
On request
PITsign indicator light unit red, yellow, green including LED, mountingfoot,
conduit pipe (250 mm), UB = 24 V DC, protec ...
On request
PITsign muting lamp in accordance with EN 61496 including incandescentlamp and
wall mounting, permanent light with optio ...
On request
PITsign LED muting lamp including LED and wall mounting, UB = 24 V DC /
4 W / <200 mA, protection type housing: IP65, di ...
On request
PITsign muting lamp including incandescent lamp and wall mounting, UB =24 V DC
/ 5 W / 300 mA, protection type housing: ...
On request
PITestop, contact block, 2 N/C, terminal (screw type).
On request
PITestop, E-STOP pushbutton IP65, without logo, installation diameter:22.3 mm.
On request
PITenable 3-step enable switch, 5 m connection cable and M12
angled connector.
On request
PITmode connector set for electronic operating mode selector switch PITm3p.
Consisting of 1 x 8-pin and 1 x 10-pin femal ...
On request
Enabling switch, 3 levels, 1 signal contact, 6-core cable (5 m) with
open end.
On request
PITestop, E-STOP/contact block set, consisting of E-STOP pushbuttonwithout
logo and contact block, 2 N/C, terminals (scr ...
On request
PITestop, contact block, 1 N/C with monitoring, 1 N/O, flat connector.
On request
PITestop, E-STOP pushbutton IP6K9K, without logo, for hygiene areas,
installation diameter: 22.3 mm.
On request
PITestop, E-STOP pushbutton IP65, with protective collar, without logo,
installation diameter: 22.3 mm.
On request
PITestop, E-STOP pushbutton IP65, key switch, with E-STOP symbol and
with logo, installation diameter: 22.3 mm.
On request
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer