In Asia, the number of binding regulations for the design of safe machinery is not really very high. Rapid industrial growth, however, means that the demand for machinery safety components is rising here too. Various certification processes and industrial health and safety laws are in part responsible, defining relevant protective measures and minimum standards.
Laws and standards in Asia
Laws and standards in Russia and the CIS countries
Russia and the CIS countries have been implementing TR CU certification (Technical Regulations of the Customs Union) for some years. This means that technical devices that fall within a specific product area must undergo a certain certification process.
Machinery and any corresponding technical accessories undergo a type approval test through a European notified body, for example. This test is normally recognised by an approval body based in Russia.
Laws and standards in China
China has introduced CCC certification. Similar to the position in Russia, technical products are subject to mandatory certification through a national approvals body.
Production sites are also inspected. If a technical device falls with the scope of the product list, which is subdivided into 19 categories, certification is mandatory, otherwise it will be necessary to supply a type of "declaration of no objection" from a national notified body.
Laws and standards in Japan
The Japanese Industrial Safety and Health Law specifies that hazardous machinery or machinery that is used in hazardous environments must be equipped with appropriate protective measures, as defined by the national Ministry. For example this relates to rubber grinding machines, presses, overload protection devices for cranes, sawing machines in woodworking or electrical parts in potentially explosive atmospheres. Some machines require approval from the national Ministry before they are manufactured or used. Boilers, cranes, pressure vessels or lifts fall into this category.
As a "best effort" the health and safety regulations require that machine manufacturers provide information about risks relating to the use of the machine and that employers/machine users carry out a risk assessment.
Above all, the Japanese Industrial Safety & Health Association (JISHA) supports the introduction of risk evaluations and health and safety management systems in Japan. Due to Japanese law, each employer/machine user must ensure that industrial safety measures are in place. Employees are obliged to support the measures that their employer puts in place.
The methodology for risk assessment is stated in Japanese standards (Japanese Industrial Standards, JIS), which are harmonised with international standards. Although the risk assessment is obligatory when certain chemical materials are used, it is currently not required in other industries.
Pilz GmbH & Co. KG
Telephone: +49 711 3409-0
Telephone: +49 711 3409 444
- Canada: +1 888-315-PILZ (315-7459)
- United States (toll-free): +1 877-PILZUSA (745-9872)
- Mexico: +52 55 5572 1300
- Brazil: + 55 11 99562-8882
- Netherlands: +31 347 320477
- Turkey: +90 216 5775552
- Sweden: +46 300 13990 / +45 74436332
- Spain: +34 938497433
- Austria: +43 1 7986263-444
- Switzerland: +41 62 889 79 32
- Belgium: +32 9 321 75 70
- Ireland: +353 21 4804983
- United Kingdom: +44 1536 462203
- Portugal: +351 229 407 594
- Russia: +7 495 6654993
- Germany: +49 711 3409 444
- Denmark: +45 74436332
- France (toll-free): +33 3 88104000
- Finland: +358 10 3224030 / +45 74436332
- Italy: +39 0362 1826711
- South Korea: +82 31 778 3390
- Singapore: +65 6829 2920
- Australia (toll-free): +61 3 9560 0621 / 1300 723 334
- Japan: +81 45 471 2281
- China: +86 400-088-3566
- Thailand: +66 210 54613
- New Zealand: +64 9 6345350
- Taiwan: +886 2 25700068