CE marking

We would like to relocate within the EU a machine that has been built and certified in accordance with the Machinery Directive 98/37/EC. May this machine be put back into service in this way?

If the machine is to be put back into service in the same state, then no measures are required with regard to the Machinery Directive 2006/42/EC. In this case the CE mark can be regarded as a type of passport within the EU.

 

Headoffice

Pilz GmbH & Co. KG
Felix-Wankel-Straße 2
73760 Ostfildern
Germany

Telephone: +49 711 3409-0
E-Mail: pilz.gmbh@pilz.de

Technical Support

Telephone: +49 711 3409 444
E-Mail: support@pilz.com

Americas

  • Mexico: +52 55 5572 1300
  • United States (toll-free): +1 877-PILZUSA (745-9872)
  • Canada: +1 888-315-PILZ (315-7459)
  • Brazil: + 55 11 4942-7032

Europe

  • Netherlands: +31 347 320477
  • Belgium: +32 9 321 75 70
  • Finland: +358 10 3224030 / +45 74436332
  • Italy: +39 0362 1826711
  • Sweden: +46 300 13990 / +45 74436332
  • Portugal: +351 229 407 594
  • Ireland: +353 21 4804983
  • Switzerland: +41 62 889 79 32
  • Turkey: +90 216 5775552
  • France (toll-free): +33 3 88104000
  • Spain: +34 938497433
  • Russia: +7 495 6654993
  • United Kingdom: +44 1536 462203
  • Austria: +43 1 7986263-444
  • Denmark: +45 74436332
  • Germany: +49 711 3409 444

Asia Pacific

  • New Zealand: +64 9 6345350
  • Taiwan: +886 2 25700068
  • Australia (toll-free): +61 3 9560 0621 / 1300 723 334
  • China: +86 400-088-3566
  • Thailand: +66 210 54613
  • South Korea: +82 31 778 3390
  • Singapore: +65 6829 2920
  • Japan: +81 45 471 2281
Was this article helpful?