Global Site | english

Safety-related equipment

How quickly is the "hazard detectable?" and where can we look up the data?

There is no standardised speed at which we can safely assume that the hazard arising from that speed can always be detected on time.

However, there are some limit values, in VDI 2854 for example, which say that where there are hazardous movements with no pinch or shear points, then speed should be limited to 15m/min. Where there are hazardous movements with pinch and shear points, then 2m/min must not be exceeded.

Please note: These values may be defined differently by other Type C standards and so must be reviewed on a case by case basis.

 

Headoffice

Pilz GmbH & Co. KG
Felix-Wankel-Straße 2
73760 Ostfildern
Germany

Telephone: +49 711 3409-0
E-Mail: pilz.gmbh@pilz.de

Technical Support

Telephone: +49 711 3409 444
E-Mail: support@pilz.com

Americas

  • United States (toll-free): +1 877-PILZUSA (745-9872)
  • Brazil: + 55 11 4942-7028
  • Canada: +1 888-315-PILZ (315-7459)
  • Mexico: +52 55 5572 1300

Europe

  • Austria: +43 1 7986263-444
  • France (toll-free): +33 3 88104000
  • Finland: +358 10 3224030 / +45 74436332
  • Denmark: +45 74436332
  • Russia: +7 495 6654993
  • Germany: +49 711 3409 444
  • Sweden: +46 300 13990 / +45 74436332
  • Turkey: +90 216 5775552
  • Switzerland: +41 62 88979 30
  • Ireland: +353 21 4804983
  • Netherlands: +31 347 320477
  • Spain: +34 938497433
  • Italy: +39 0362 1826711
  • United Kingdom: +44 1536 462203
  • Belgium: +32 9 321 75 75

Asia Pacific

  • Australia: +61 3 9560 0621
  • China: +86 21 60880878-216
  • Taiwan: +886 2 25700068
  • Japan: +81 45 471 2281
  • South Korea: +82 31 778 3390
  • New Zealand: +64 9 6345350