Global Site | english

Standards expertise

When do you need to carry out forced dynamisation?

The risk assessment that must be produced for every machine will determine whether forced dynamisation is required.
If continuous monitoring of states of parts of the control system is not possible for technical reasons, then forced dynamisation must be provided.

Example: Motor brakes generally do not have reliable signal outputs with regard to the state of the brakes, "open/closed". So, for a case where one channel of the 2-channel holding system is implemented with motor brakes, forced dynamisation (cyclical brake test) is provided as a fault detection measure for the motor brake.

 

Headoffice

Pilz GmbH & Co. KG
Felix-Wankel-Straße 2
73760 Ostfildern
Germany

Telephone: +49 711 3409-0
E-Mail: pilz.gmbh@pilz.de

Technical Support

Telephone: +49 711 3409 444
E-Mail: support@pilz.com

Americas

  • Brazil: + 55 11 4942-7028
  • Mexico: +52 55 5572 1300
  • Canada: +1 888-315-PILZ (315-7459)
  • United States (toll-free): +1 877-PILZUSA (745-9872)

Europe

  • Belgium: +32 9 321 75 75
  • Germany: +49 711 3409 444
  • France (toll-free): +33 3 88104000
  • Ireland: +353 21 4804983
  • Russia: +7 495 6654993
  • Spain: +34 938497433
  • Turkey: +90 216 5775552
  • Austria: +43 1 7986263-444
  • United Kingdom: +44 1536 462203
  • Netherlands: +31 347 320477
  • Denmark: +45 74436332
  • Switzerland: +41 62 88979 30
  • Sweden: +46 300 13990 / +45 74436332
  • Italy: +39 0362 1826711
  • Finland: +358 10 3224030 / +45 74436332

Asia Pacific

  • Japan: +81 45 471 2281
  • Taiwan: +886 2 25700068
  • Australia: +61 3 9560 0621
  • South Korea: +82 31 778 3390
  • New Zealand: +64 9 6345350
  • China: +86 21 60880878-216