Global Site | english

Standards expertise

Is it correct to say that there is no need to take any additional safety measures against pinching if the lifting speed of a manually operated box lifter is low?

Is it correct to say that there is no need to take any additional safety measures (safety fence, light grid, pressure sensitive edge) against crushing by a downward or upward moving load if the lifting speed of a manually operated box lifter is low (limit value 2m/min)? Is there a relevant C standard (e.g. DIN 1570 for lifting tables)?

Generally a risk assessment must be produced for the lifting device. The lifting device must be built and safeguarded based on this risk assessment.

If the lifting device falls under the requirements of EN 1570-1, then this standard should be applied.


Further information:

The first step to machinery safety: Risk assessment

 

Headoffice

Pilz GmbH & Co. KG
Felix-Wankel-Straße 2
73760 Ostfildern
Germany

Telephone: +49 711 3409-0
E-Mail: pilz.gmbh@pilz.de

Technical Support

Telephone: +49 711 3409 444
E-Mail: support@pilz.com

Americas

  • Mexico: +52 55 5572 1300
  • Canada: +1 888-315-PILZ (315-7459)
  • United States (toll-free): +1 877-PILZUSA (745-9872)
  • Brazil: + 55 11 4942-7028

Europe

  • Belgium: +32 9 321 75 75
  • Italy: +39 0362 1826711
  • Switzerland: +41 62 88979 30
  • Austria: +43 1 7986263-444
  • Turkey: +90 216 5775552
  • Germany: +49 711 3409 444
  • Sweden: +46 300 13990 / +45 74436332
  • Netherlands: +31 347 320477
  • United Kingdom: +44 1536 462203
  • Finland: +358 10 3224030 / +45 74436332
  • Denmark: +45 74436332
  • Ireland: +353 21 4804983
  • France (toll-free): +33 3 88104000
  • Spain: +34 938497433
  • Russia: +7 495 6654993

Asia Pacific

  • Taiwan: +886 2 25700068
  • Japan: +81 45 471 2281
  • China: +86 21 60880878-216
  • New Zealand: +64 9 6345350
  • South Korea: +82 31 778 3390
  • Australia: +61 3 9560 0621