Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
PMMA acrylic tube for sealing and protecting a
safety light guard with a length of 30 cm of the series "PSEN op.../1".Th ...
On request
5 PMMA Altuglas plates of 30 cm length with the corresponding
mounting brackets to protect the front screen of a
safety ...
On request
5 PMMA Altuglas plates of 180 cm in length with the corresponding
mounting brackets to protect the front screen of a
saf ...
On request
Mounting kit with 4 mounting profiles for fixing a
safety light guard of the series "PSEN op.../1" for light guard lengt ...
On request
Mounting kit with 4 mounting profiles for fixing a deviating mirror
of the series "PSEN op Mirror .../1" into the matchi ...
On request
5 PMMA Altuglas plates of 120 cm in length with the corresponding
mounting brackets to protect the front screen of a
saf ...
On request
5 PMMA Altuglas plates of 90 cm in length with the corresponding
mounting brackets to protect the front screen of a
safe ...
On request
Installation bracket for the "PSEN op Mirror" series for directinstallation.
On request
Deviating mirror 80 mm wide, with at length of 120 cm. For use with all
light guards of the PSENopt range < 120 cm. For ...
On request
Deviating mirror 80 mm wide, with at length of 190 cm. For use with all
light guards of the PSENopt range < 190 cm. For ...
On request
5 PMMA Altuglas plates of 50 cm in length with the corresponding
mounting brackets to protect the front screen of a
safe ...
On request
5 PMMA Altu glass plates of 45 cm length with relevant mounting
brackets for protection of the front screen of a safety ...
On request
PMMA acrylic tube for sealing and protecting a
safety light guard with a length of 120 cm of the series "PSEN op.../1".T ...
On request
PMMA acrylic tube for sealing and protecting a
safety light guard with a length of 135 cm of the series "PSEN op.../1".T ...
On request
Sensor T-muting arm with passive reflector unit and matching
bracket on the basis light guard PSEN opXX-xx-xxx/1.
On request
Sensor individual muting arm for basic light guard PSEN opXX-xx-xxx/1,
active.
On request
Mounting set for fixing two muting arms to a basis
light guard of the PSEN opXX-xx-xxx/1 series.
On request
Sensing device L-muting arm with passive reflector unit and matching
bracket on the basis light guard PSEN opXX-xx-xxx/1 ...
On request
Mounting kit for installation without dead zones of two Advanced lightguards
over the corner.
On request
Programming adapter for the PSEN opXX-A series. Using the PC Software
all the functions (muting, blanking, cascading) of ...
On request
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer