Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
Sensor T-muting arm with passive reflector unit and matching
bracket on the basis light guard PSEN opXX-xx-xxx/1.
On request
Sensor individual muting arm for basic light guard PSEN opXX-xx-xxx/1,
active.
On request
Mounting set for fixing two muting arms to a basis
light guard of the PSEN opXX-xx-xxx/1 series.
On request
Sensing device L-muting arm with passive reflector unit and matching
bracket on the basis light guard PSEN opXX-xx-xxx/1 ...
On request
Mounting kit for installation without dead zones of two Advanced lightguards
over the corner.
On request
Programming adapter for the PSEN opXX-A series. Using the PC Software
all the functions (muting, blanking, cascading) of ...
On request
Sensor individual muting arm for basic light guard PSEN opXX-xx-xxx/1,
passive.
On request
Integral mirrors for body protection resolution including PSEN op
Protective Column with a length of 165 cm for a beam d ...
On request
Integral mirrors for body protection resolution including PSEN op
Protective Column with a length of 120 cm for a beam d ...
On request
Integral mirrors for body protection resolution including PSEN op
Protective Column with a length of 100 cm for a beam d ...
On request
Integral mirrors for body protection resolution including PSEN op
Protective Column with a length of 165 cm for a beam d ...
On request
Single-channel light guard / receiver with N/O / N/C outputs, for use asa
muting sensor, supply voltage 24 V, connector ...
On request
Reflected light sensor with N/O / N/C outputs for use as a mutingsensor,
supply voltage 24 V, connector M12, 4-pin. Plea ...
On request
Single-channel light guard / transmitter, for use as a muting sensor,
supply voltage 24 V, connector M12, 4-pin. Please ...
On request
Mounting kit for light guards of the series PSENopt SL in O form.
Lateral attachment to the profile. PU = 4 mounting bra ...
On request
Mounting kit for light guards of the series PSENopt SL in C form.
Lateral attachment to the profile. PU = 2 mounting bra ...
On request
Mounting kit for light guards of the series PSENopt SL in L form.
Lateral attachment to the profile. PU = 2 mounting bra ...
On request
Test rod for checking the function, diameter 30 mm, hand protection.
On request
Test rod for checking the function, diameter 14 mm, finger protection.
On request
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer